Kawai CN33 manual Four Hands Mode

Page 17

6) FOUR HANDS MODE

The FOUR HANDS function divides the keyboard of the CN33 digital piano into separate Upper and Lower sections in a similar way to that of the SPLIT function. In addition, the octave/pitch of each section is also adjusted, allowing two people to play the piano together.

Split Point

Lower section

 

 

Upper section

 

 

 

 

 

c

c

c

PLAYING THE PIANO

2

…Step 1

Press and hold the SPLIT button, then press the damper/sustain (right) pedal and the soft (left) pedal together.

Damper/Sustain

The LED indicator for the SPLIT button will start to flash, indicating that FOUR HANDS mode has been

Soft pedal

Press and hold the button

pedal

activated.

In addition, the LED indicator for the Upper section sound button will also turn on, while the Lower section sound button will start to flash.

Depress the pedals

…Step 2

The selected sound variation numbers will be shown in the LED display.

The left number represents the Lower section, while the right number represents the Upper section.

When activating FOUR HANDS mode for the first time, the sound of both the Upper and Lower sections will be set to Concert Grand.

Play the piano.

With FOUR HANDS mode activated, the sounds in the Upper section are transposed two octaves down from the original pitch, while sounds from the Lower section are transposed two octaves up from the original pitch, allowing two people to play within the same key range.

The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.

„The default Split Point setting is set between E3 and F3.

„When FOUR HANDS mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower section. Please refer to the instructions on page 44 for more information.

Image 17
Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Doing so may cause the product to generate noise Is handled incorrectlyProduct and other devices Declaration of Conformity ‘ Pedals ‘ Front Panel‘ Headphones and USB Connectors ‘ Setting UP the Piano Adjust the volume level using the Master Volume sliderBasic Operations Play the pianoPress the Concert Magic and Lesson buttons simultaneously Demo SongsPress the Electric Piano button Selecting a SoundSelect other sounds Turn onButtons will turn on Dual ModePrimary sound has changed to Studio Grand Increases the volume Press the Split button Split ModePress the PIANO2 button three times Press the Split button to deactivate split modeLED indicator for the Split button will turn off Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects‘ Applying Effects Press the Effects button again to deactivate the effectsTranspose Press the Tempo button MetronomePress the Tempo button again to deactivate the metronome Press the Beat buttonVolume level of the metronome can also be adjusted Step ‘ Adjusting the Metronome VolumePress the Beat button again to deactivate the metronome Press the Tempo and Beat buttons simultaneouslyCN33 control panel will return to normal operation Panel LockPress the Concert Magic and USB buttons simultaneously ‘ Selecting a Song Press the PLAY/STOP button‘ Listening to the Song Song number will be briefly shown in the display‘ Performing a Song Use the Balance slider to adjust the volume balance‘ Concert Magic Part Volume Balance „ Easy Beat ‘ Concert Magic Song Arrangement TypesStart by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo ModesCurrent tempo will be shown in the LED display Step ‘ Concert Magic Playback SpeedPress the Lesson button Selecting a BOOK/SONGListening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionPress the REC button Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingIf no Part is selected PART1 will be selected automatically Recording REC Button‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to finish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongPress and hold the REC and PLAY/STOP buttons LED indicator of the selected song will start to flash StepErasing a Song Selected song will start to play After connecting a USB device, press the USB buttonUSB Play USB Load Overwriting the file USB SaveSelected song will be deleted Step USB DeleteConfirmation message will be shown in the display USB Format Press any of the panel buttons shown below ‘ Entering a Function Mode‘ Exiting a Function Mode Lower Octave Shift can be set from 0 to Lower Octave ShiftLower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D  B String ResonanceTouch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament ‘ Midi Overview Channel number can be set from 1 to Midi ChannelPress the S or Tvalue buttons to change the channel number Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User MemoryFactory Reset Appendices ‘ Connecting to Other Devices‘ USB Midi Screw I4 x 30 x ‘ Assembly InstructionsRemove the protective film from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version