Kawai CN33 manual ‘ USB Midi

Page 65

Page

65

‘USB MIDI

The CN33 digital piano features a ‘USB to Host’ type connector, allowing the instrument to be connected to a computer and utilised as a MIDI device. Depending on the type of computer and operating system installed, additional driver software may be required for USB MIDI communication to function correctly.

Operating System

USB MIDI Driver Support

Windows ME

No additional USB MIDI driver software required.

Windows XP (no SP, SP1, SP2, SP3)

The standard (built-in) Windows USB MIDI driver will be installed

Windows XP 64-bit

automatically when the instrument is connected to the computer.

Windows Vista (SP1, SP2)

 

Windows Vista 64-bit (SP1, SP2)

After driver installation, ensure that the ‘USB Audio Device’ (Windows ME/Windows

Windows 7

XP) or ‘USB-MIDI’ (Windows Vista/Windows 7) device is correctly selected in the

Windows 7 64-bit

application software.

 

 

 

 

Additional USB MIDI driver software required.

Windows 98 SE

Please download the USB MIDI driver from the KAWAI website:

Windows 2000

f http://www.kawai.co.jp/english

Windows Vista (no SP)

After driver installation, ensure that the ‘KAWAI USB MIDI’ device is correctly selected

 

 

in the application software.

 

 

Windows Vista 64-bit (no SP)

USB MIDI is not supported.

Please upgrade to service pack 1 or service pack 2.

 

 

 

 

No additional USB MIDI driver software required.

Mac OS X

The standard (built-in) Mac OS X USB MIDI driver will be installed

 

automatically when the instrument is connected to the computer.

 

 

Mac OS 9

USB MIDI is not supported.

Please use the standard MIDI IN/OUT connectors.

 

 

 

USB MIDI INFORMATION

„If the instrument’s MIDI IN/OUT jacks and USB MIDI port are both connected simultaneously, the USB MIDI port will be given priority.

„Ensure that the instrument is turned off before attempting to connect the USB MIDI cable.

„When connecting the instrument to a computer using the USB MIDI port, there may be a short delay before communications begin.

„If the instrument is connected to a computer via a USB hub and USB MIDI communication becomes unreliable/ unstable, please connect the USB MIDI cable directly to the one of the computer’s USB ports.

„Disconnecting the USB MIDI cable suddenly, or turning the instrument on/off while using USB MIDI may cause computer instability in the following situations:

-while installing the USB MIDI driver

-while starting up the computer

-while MIDI applications are performing tasks

-while the computer is in energy saver mode

„If there are any further problems experienced with USB MIDI communication while the instrument is connected, please double-check all connections and relevant MIDI settings in the computer’s operating system.

APPENDICES

*‘MIDI’ is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI).

*‘Windows’ is a registered trademark of Microsoft Corporation.

*‘Mac’ and ‘Mac OS’ are registered trademarks of Apple Inc.

*Other company names and product names mentioned referenced herein may be registered trademarks or trademarks of respective owners.

8

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Doing so may cause the product to generate noise Is handled incorrectlyProduct and other devices Declaration of Conformity ‘ Pedals ‘ Front Panel‘ Headphones and USB Connectors ‘ Setting UP the Piano Adjust the volume level using the Master Volume sliderBasic Operations Play the pianoPress the Concert Magic and Lesson buttons simultaneously Demo SongsPress the Electric Piano button Selecting a SoundSelect other sounds Turn onButtons will turn on Dual ModePrimary sound has changed to Studio Grand Increases the volume Press the Split button Split ModePress the PIANO2 button three times Press the Split button to deactivate split modeLED indicator for the Split button will turn off Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects‘ Applying Effects Press the Effects button again to deactivate the effectsTranspose Press the Tempo button MetronomePress the Tempo button again to deactivate the metronome Press the Beat buttonVolume level of the metronome can also be adjusted Step ‘ Adjusting the Metronome VolumePress the Beat button again to deactivate the metronome Press the Tempo and Beat buttons simultaneouslyCN33 control panel will return to normal operation Panel LockPress the Concert Magic and USB buttons simultaneously ‘ Selecting a Song Press the PLAY/STOP button‘ Listening to the Song Song number will be briefly shown in the display‘ Performing a Song Use the Balance slider to adjust the volume balance‘ Concert Magic Part Volume Balance „ Easy Beat ‘ Concert Magic Song Arrangement TypesStart by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo ModesCurrent tempo will be shown in the LED display Step ‘ Concert Magic Playback SpeedPress the Lesson button Selecting a BOOK/SONGListening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionPress the REC button Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingIf no Part is selected PART1 will be selected automatically Recording REC Button‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to finish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongPress and hold the REC and PLAY/STOP buttons LED indicator of the selected song will start to flash StepErasing a Song Selected song will start to play After connecting a USB device, press the USB buttonUSB Play USB Load Overwriting the file USB SaveSelected song will be deleted Step USB DeleteConfirmation message will be shown in the display USB Format Press any of the panel buttons shown below ‘ Entering a Function Mode‘ Exiting a Function Mode Lower Octave Shift can be set from 0 to Lower Octave ShiftLower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D  B String ResonanceTouch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament ‘ Midi Overview Channel number can be set from 1 to Midi ChannelPress the S or Tvalue buttons to change the channel number Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User MemoryFactory Reset Appendices ‘ Connecting to Other Devices‘ USB Midi Screw I4 x 30 x ‘ Assembly InstructionsRemove the protective film from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version
Top Page Image Contents