Kawai CN33 manual Playing Back a Song, ‘ Playing Back Recorded Parts Separately

Page 36

2) PLAYING BACK A SONG

5

RECORDER

 

The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which song and part is played.

…Step 1

Press the PLAY/STOP button to start playing the recorded song.

2

1

Hold down the button

 

Press the PLAY/STOP button again to stop playback.

To select a different song for playback, hold the PLAY/STOP button and press the SOUND SELECT button that corresponds to the desired song. The song will begin playback when the two buttons are released.

„While the song is being played, performance information is also sent to supported devices as MIDI data (See page 47). PART1 is sent on 1ch and PART2 is sent on 2ch. When recording in DUAL mode, additional information for PART1 is sent on 9ch and additional information for PART2 is sent on 10ch.

‘PLAYING BACK RECORDED PARTS SEPARATELY

When selecting a song recorded with two parts, it is possible to playback PART1 and PART2 separately.

First hold the PLAY/STOP button. If LED indicators corresponding to PART1 and PART2 turn on, both parts have been recorded successfully. Releasing the PLAY/STOP button will begin playing PART1 and PART2 simultaneously.

…Step 1

Press and hold the PLAY/STOP button, then press the SOUND SELECT button that corresponds to either PART1 or PART2.

2

1

Hold down the button

 

The LED indicator will turn off accordingly, indicating that the part will not be played back. The song will begin playback when the PLAY/STOP button is released.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Is handled incorrectly Product and other devicesDoing so may cause the product to generate noise Declaration of Conformity ‘ Front Panel ‘ Pedals‘ Headphones and USB Connectors Adjust the volume level using the Master Volume slider ‘ Setting UP the PianoBasic Operations Play the pianoDemo Songs Press the Concert Magic and Lesson buttons simultaneouslySelecting a Sound Press the Electric Piano buttonSelect other sounds Turn onDual Mode Primary sound has changed to Studio GrandButtons will turn on Increases the volume Split Mode Press the Split buttonPress the Split button to deactivate split mode LED indicator for the Split button will turn offPress the PIANO2 button three times Four Hands Mode Press the Split button again to deactivate Four Hands mode Reverb and Effects ‘ Adding ReverbPress the Effects button again to deactivate the effects ‘ Applying EffectsTranspose Metronome Press the Tempo buttonPress the Tempo button again to deactivate the metronome Press the Beat button‘ Adjusting the Metronome Volume Volume level of the metronome can also be adjusted StepPress the Beat button again to deactivate the metronome Press the Tempo and Beat buttons simultaneouslyPanel Lock Press the Concert Magic and USB buttons simultaneouslyCN33 control panel will return to normal operation Press the PLAY/STOP button ‘ Selecting a Song‘ Listening to the Song Song number will be briefly shown in the displayUse the Balance slider to adjust the volume balance ‘ Concert Magic Part Volume Balance‘ Performing a Song ‘ Concert Magic Song Arrangement Types „ Easy BeatPress and hold the Concert Magic button Start by tapping any key with a constant steady beat‘ Steady Beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Current tempo will be shown in the LED display StepSelecting a BOOK/SONG Press the Lesson button‘ Adjusting the Tempo of a Song Listening to and Playing a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionRecording a Song Practice Press the REC buttonPress the PLAY/STOP button to listen to the recording ‘ Playing Back the Recording Recording REC Button If no Part is selected PART1 will be selected automaticallyStart to play the piano Press the PLAY/STOP button to stop recording‘ Recording a Second Part Press the PLAY/STOP button to finish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyLED indicator of the selected song will start to flash Step Erasing a SongPress and hold the REC and PLAY/STOP buttons After connecting a USB device, press the USB button USB PlaySelected song will start to play USB Load USB Save Overwriting the fileUSB Delete Confirmation message will be shown in the displaySelected song will be deleted Step USB Format ‘ Entering a Function Mode ‘ Exiting a Function ModePress any of the panel buttons shown below Lower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Damper Hold ON/OFF Press the S or Tvalue buttons to select the desired setting Damper EffectString Resonance  D  BTouch Curve Four Hands ON/OFF Tuning Press the S or Tvalue buttons to raise or lower the pitchTemperament Brief Explanation of Temperaments‘ KEY Signature of Temperament ‘ Midi Overview Midi Channel Press the S or Tvalue buttons to change the channel numberChannel number can be set from 1 to Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers User Memory Press the REC button to execute the save operationFactory Reset ‘ Connecting to Other Devices Appendices‘ USB Midi ‘ Assembly Instructions Screw I4 x 30 xRemove the protective film from the display ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage KPSZ-0324 OW1036E-I1001 Version
Top Page Image Contents