Kawai CN33 manual Midi Channel, Press the S or Tvalue buttons to change the channel number

Page 55

Page

55

10) MIDI CHANNEL

This function is used to determine on which MIDI channel the CN33 digital piano will exchange MIDI information with external MIDI devices and instruments or a personal computer.

The selected channel will function as both the transmit and receive channel.

Step 1

Press and hold the TRANSPOSE and USB buttons, then press the CHOIR & PAD button.

2

1

Hold down both buttons

The display will alternate between showing ‘Chn’ (Channel) and the channel number. The default channel is 1.

Step 2

Press the S or TVALUE buttons to change the channel number.

MIDI Channel

The channel number can be set from 1 to 16.

The CN33 digital piano’s MIDI channel setting defaults to receiving MIDI channel information from all channels, 1 to 16. each time the power is turned on. This is called ‘omni mode on’. The CN33 digital piano will switch to ‘omni mode off’ when a speciﬁc channel is selected using the MIDI channel function, and data will only be received on that speciﬁed channel. In order to specify channel 1 in the ‘omni mode off’ state, ﬁrst select channel 2, then select channel 1.

FUNCTION

BUTTONS

7

Image 55

Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Product and other devices Is handled incorrectlyDoing so may cause the product to generate noise Declaration of Conformity ‘ Pedals ‘ Front Panel‘ Headphones and USB Connectors Play the piano Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic OperationsPress the Concert Magic and Lesson buttons simultaneously Demo SongsTurn on Selecting a SoundPress the Electric Piano button Select other soundsPrimary sound has changed to Studio Grand Dual ModeButtons will turn on Increases the volume Press the Split button Split ModeLED indicator for the Split button will turn off Press the Split button to deactivate split modePress the PIANO2 button three times Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects‘ Applying Effects Press the Effects button again to deactivate the effectsTranspose Press the Beat button MetronomePress the Tempo button Press the Tempo button again to deactivate the metronomePress the Tempo and Beat buttons simultaneously ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Step Press the Beat button again to deactivate the metronomePress the Concert Magic and USB buttons simultaneously Panel LockCN33 control panel will return to normal operation Song number will be brieﬂy shown in the display Press the PLAY/STOP button‘ Selecting a Song ‘ Listening to the Song‘ Concert Magic Part Volume Balance Use the Balance slider to adjust the volume balance‘ Performing a Song „ Easy Beat ‘ Concert Magic Song Arrangement Types‘ Concert Magic Demo Modes Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Steady BeatCurrent tempo will be shown in the LED display Step ‘ Concert Magic Playback SpeedPress the Lesson button Selecting a BOOK/SONG‘ Exiting the Lesson Function ‘ Adjusting the Tempo of a SongListening to and Playing a Song Press the PLAY/STOP button to play the selected song‘ Playing Back the Recording Recording a Song PracticePress the REC button Press the PLAY/STOP button to listen to the recordingIf no Part is selected PART1 will be selected automatically Recording REC ButtonPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁnish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongErasing a Song LED indicator of the selected song will start to ﬂash StepPress and hold the REC and PLAY/STOP buttons USB Play After connecting a USB device, press the USB buttonSelected song will start to play USB Load Overwriting the ﬁle USB SaveConﬁrmation message will be shown in the display USB DeleteSelected song will be deleted Step USB Format ‘ Exiting a Function Mode ‘ Entering a Function ModePress any of the panel buttons shown below Lower Octave Shift can be set from 0 to Lower Octave ShiftLower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D B String ResonanceTouch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament ‘ Midi Overview Press the S or Tvalue buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User MemoryFactory Reset Appendices ‘ Connecting to Other Devices‘ USB Midi Screw I4 x 30 x ‘ Assembly InstructionsRemove the protective ﬁlm from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version