Kawai CN33 manual Press the Beat button again to deactivate the metronome

Page 23

Page

23

Step 2

Press the S or TVALUE buttons to select the desired time signature.

The currently selected time signature will be shown in the LED display.

1/4	2/4	3/4	4/4	5/4	3/8	6/8

Step 3

Press the BEAT button again to deactivate the metronome.

The LED indicator for the BEAT button will turn off, indicating that the metronome has been deactivated.

Both the TEMPO button and the BEAT button can be used to activate and deactivate the metronome, depending on whether the tempo or time signature is being adjusted.

Any changes made to the metronome time signature setting will remain until the power is turned off.

When the power is turned off, the metronome time signature will return to the default setting of ‘4/4’.

ADJUSTING THE METRONOME VOLUME

The volume level of the metronome can also be adjusted.

Step 1

Press the TEMPO and BEAT buttons simultaneously.

The LED indicators for both the TEMPO and BEAT buttons will turn on, and the metronome will begin counting with the previously selected time signature.

The metronome volume will be shown in the display.

Step 2

Press the S or TVALUE buttons to adjust the metronome volume to the desired level.

The metronome volume can be adjusted within the range of 1 (soft) to 10 (loud).

Step 3

Press the TEMPO and BEAT buttons simultaneously again to deactivate the metronome.

The LED indicators for the TEMPO and BEAT buttons will turn off, indicating that the metronome has been deactivated.

PLAYING THE PIANO

2

Any changes made to the metronome volume will remain until the power is turned off.

When the power is turned off, the metronome volume will return to the default setting of ‘5’.

Image 23

Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Doing so may cause the product to generate noise Is handled incorrectlyProduct and other devices Declaration of Conformity ‘ Pedals ‘ Front Panel‘ Headphones and USB Connectors Play the piano Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic OperationsPress the Concert Magic and Lesson buttons simultaneously Demo SongsTurn on Selecting a SoundPress the Electric Piano button Select other soundsButtons will turn on Dual ModePrimary sound has changed to Studio Grand Increases the volume Press the Split button Split ModePress the PIANO2 button three times Press the Split button to deactivate split modeLED indicator for the Split button will turn off Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects‘ Applying Effects Press the Effects button again to deactivate the effectsTranspose Press the Beat button MetronomePress the Tempo button Press the Tempo button again to deactivate the metronomePress the Tempo and Beat buttons simultaneously ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Step Press the Beat button again to deactivate the metronomeCN33 control panel will return to normal operation Panel LockPress the Concert Magic and USB buttons simultaneously Song number will be brieﬂy shown in the display Press the PLAY/STOP button‘ Selecting a Song ‘ Listening to the Song‘ Performing a Song Use the Balance slider to adjust the volume balance‘ Concert Magic Part Volume Balance „ Easy Beat ‘ Concert Magic Song Arrangement Types‘ Concert Magic Demo Modes Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Steady BeatCurrent tempo will be shown in the LED display Step ‘ Concert Magic Playback SpeedPress the Lesson button Selecting a BOOK/SONG‘ Exiting the Lesson Function ‘ Adjusting the Tempo of a SongListening to and Playing a Song Press the PLAY/STOP button to play the selected song‘ Playing Back the Recording Recording a Song PracticePress the REC button Press the PLAY/STOP button to listen to the recordingIf no Part is selected PART1 will be selected automatically Recording REC Button‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to ﬁnish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongPress and hold the REC and PLAY/STOP buttons LED indicator of the selected song will start to ﬂash StepErasing a Song Selected song will start to play After connecting a USB device, press the USB buttonUSB Play USB Load Overwriting the ﬁle USB SaveSelected song will be deleted Step USB DeleteConﬁrmation message will be shown in the display USB Format Press any of the panel buttons shown below ‘ Entering a Function Mode‘ Exiting a Function Mode Lower Octave Shift can be set from 0 to Lower Octave ShiftLower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D B String ResonanceTouch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament ‘ Midi Overview Channel number can be set from 1 to Midi ChannelPress the S or Tvalue buttons to change the channel number Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User MemoryFactory Reset Appendices ‘ Connecting to Other Devices‘ USB Midi Screw I4 x 30 x ‘ Assembly InstructionsRemove the protective ﬁlm from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version