Kawai CN33 manual Press any of the panel buttons shown below, Entering a Function Mode

Page 43

7. FUNCTION BUTTONS

The function settings are responsible for controlling various advanced parameters within the CN33 digital piano,

and can be selected by pressing a combination of buttons.

ENTERING A FUNCTION MODE

Step 1

Press and hold the TRANSPOSE and USB buttons, then press one of the other panel buttons shown below.

Lower Octave Shift

Lower Pedal On/Off

Damper Hold On/Off

Damper Effect

String Resonance

Touch Curve

Four Hands On/Off

Tuning

Temperament

MIDI Channel

Transmit Program Change On/Off

Local Control On/Off

Multi-Timbral Mode On/Off

Channel Mute

Send Program Change Number

User Memory

Factory Reset

1

2

Hold down both buttons

The LED indicator for the corresponding button will start to ﬂash, indicating that the function is selected.

EXITING A FUNCTION MODE

Step 1

Press any of the panel buttons shown below.

FUNCTION

BUTTONS

7

The LED indicator for the button will stop ﬂashing and return to its normal state. When the power is turned off, settings will be reset to the factory default value.

Image 43

Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Product and other devices Is handled incorrectlyDoing so may cause the product to generate noise Declaration of Conformity ‘ Pedals ‘ Front Panel‘ Headphones and USB Connectors Play the piano Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic OperationsPress the Concert Magic and Lesson buttons simultaneously Demo SongsTurn on Selecting a SoundPress the Electric Piano button Select other soundsPrimary sound has changed to Studio Grand Dual ModeButtons will turn on Increases the volume Press the Split button Split ModeLED indicator for the Split button will turn off Press the Split button to deactivate split modePress the PIANO2 button three times Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects‘ Applying Effects Press the Effects button again to deactivate the effectsTranspose Press the Beat button MetronomePress the Tempo button Press the Tempo button again to deactivate the metronomePress the Tempo and Beat buttons simultaneously ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Step Press the Beat button again to deactivate the metronomePress the Concert Magic and USB buttons simultaneously Panel LockCN33 control panel will return to normal operation Song number will be brieﬂy shown in the display Press the PLAY/STOP button‘ Selecting a Song ‘ Listening to the Song‘ Concert Magic Part Volume Balance Use the Balance slider to adjust the volume balance‘ Performing a Song „ Easy Beat ‘ Concert Magic Song Arrangement Types‘ Concert Magic Demo Modes Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Steady BeatCurrent tempo will be shown in the LED display Step ‘ Concert Magic Playback SpeedPress the Lesson button Selecting a BOOK/SONG‘ Exiting the Lesson Function ‘ Adjusting the Tempo of a SongListening to and Playing a Song Press the PLAY/STOP button to play the selected song‘ Playing Back the Recording Recording a Song PracticePress the REC button Press the PLAY/STOP button to listen to the recordingIf no Part is selected PART1 will be selected automatically Recording REC ButtonPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁnish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongErasing a Song LED indicator of the selected song will start to ﬂash StepPress and hold the REC and PLAY/STOP buttons USB Play After connecting a USB device, press the USB buttonSelected song will start to play USB Load Overwriting the ﬁle USB SaveConﬁrmation message will be shown in the display USB DeleteSelected song will be deleted Step USB Format ‘ Exiting a Function Mode ‘ Entering a Function ModePress any of the panel buttons shown below Lower Octave Shift can be set from 0 to Lower Octave ShiftLower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D B String ResonanceTouch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament ‘ Midi Overview Press the S or Tvalue buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User MemoryFactory Reset Appendices ‘ Connecting to Other Devices‘ USB Midi Screw I4 x 30 x ‘ Assembly InstructionsRemove the protective ﬁlm from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version