Kawai CN33 Press the PIANO2 button three times, Press the Split button to deactivate split mode

Page 16

THE

Step 4

Press the PIANO2 button three times.

ON

Press three times

Step 5

The LED indicator for the PIANO2 button will turn on.

‘1-3’ will be shown in the LED display, indicating that the Upper section sound has been changed to Mellow Grand 2.

2	PLAYING	PIANO

Press and hold the SPLIT button, then press the HARPSI & MALLETS button twice.

ON	ON	ON
ON		ON
	2	1
	Press twice	Press and hold the button

Step 6

The LED indicator for the HARPSI & MALLETS button will start to ﬂash.

‘2-3’ will be shown in the LED display, indicating that the Lower section sound has been changed to Vibraphone.

Use the BALANCE slider to adjust the volume balance between the upper and lower sections.

Lower section

Upper section

Step 7

Press the SPLIT button to deactivate split mode.

The LED indicator for the SPLIT button will turn off.

When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower

section. Please refer to the instructions on page 44 for more information.

The inﬂuence of the damper/sustain pedal over the Lower section can also be turned on and off. Please refer to the instructions on page 45 for more information.

Image 16

Contents Appendices Page Table of Contents Important Safety Instructions Product should be connected to Product and other devices Is handled incorrectlyDoing so may cause the product to generate noise Declaration of Conformity ‘ Front Panel ‘ Pedals‘ Headphones and USB Connectors Adjust the volume level using the Master Volume slider ‘ Setting UP the PianoBasic Operations Play the pianoDemo Songs Press the Concert Magic and Lesson buttons simultaneouslySelecting a Sound Press the Electric Piano buttonSelect other sounds Turn onPrimary sound has changed to Studio Grand Dual ModeButtons will turn on Increases the volume Split Mode Press the Split buttonLED indicator for the Split button will turn off Press the Split button to deactivate split modePress the PIANO2 button three times Four Hands Mode Press the Split button again to deactivate Four Hands mode Reverb and Effects ‘ Adding ReverbPress the Effects button again to deactivate the effects ‘ Applying EffectsTranspose Metronome Press the Tempo buttonPress the Tempo button again to deactivate the metronome Press the Beat button‘ Adjusting the Metronome Volume Volume level of the metronome can also be adjusted StepPress the Beat button again to deactivate the metronome Press the Tempo and Beat buttons simultaneouslyPress the Concert Magic and USB buttons simultaneously Panel LockCN33 control panel will return to normal operation Press the PLAY/STOP button ‘ Selecting a Song‘ Listening to the Song Song number will be brieﬂy shown in the display‘ Concert Magic Part Volume Balance Use the Balance slider to adjust the volume balance‘ Performing a Song ‘ Concert Magic Song Arrangement Types „ Easy BeatPress and hold the Concert Magic button Start by tapping any key with a constant steady beat‘ Steady Beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Current tempo will be shown in the LED display StepSelecting a BOOK/SONG Press the Lesson button‘ Adjusting the Tempo of a Song Listening to and Playing a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionRecording a Song Practice Press the REC buttonPress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automaticallyPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁnish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyErasing a Song LED indicator of the selected song will start to ﬂash StepPress and hold the REC and PLAY/STOP buttons USB Play After connecting a USB device, press the USB buttonSelected song will start to play USB Load USB Save Overwriting the ﬁleConﬁrmation message will be shown in the display USB DeleteSelected song will be deleted Step USB Format ‘ Exiting a Function Mode ‘ Entering a Function ModePress any of the panel buttons shown below Lower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Damper Hold ON/OFF Press the S or Tvalue buttons to select the desired setting Damper EffectString Resonance D BTouch Curve Four Hands ON/OFF Tuning Press the S or Tvalue buttons to raise or lower the pitchTemperament Brief Explanation of Temperaments‘ KEY Signature of Temperament ‘ Midi Overview Press the S or Tvalue buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers User Memory Press the REC button to execute the save operationFactory Reset ‘ Connecting to Other Devices Appendices‘ USB Midi ‘ Assembly Instructions Screw I4 x 30 xRemove the protective ﬁlm from the display ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage KPSZ-0324 OW1036E-I1001 Version