Fujitsu MB96300 manual Features

SK-96370-144PMC-GDC User Guide

Chapter 1 Overview

1.2Features

< Supports Fujitsu’s 16FX MB96370 Series with 144 pin PMC / M08 package or the MB2198 Emulator System with the Probe Cable MB2198-507-E.

<9-15V unregulated external DC power supply

<On-board 3.3V switching mode voltage regulator

<Power-LEDs for all supply voltages

<Onboard voltage supervisor monitor

<In-Circuit serial Flash programming (UART0 or UART2)

<All resources available for evaluation

<All MCU pins routed to connectors

<4 MHz main crystal

<32 kHz crystal for sub clock operation

<Two RS232- or LIN interfaces

<Two CAN interfaces

<3 V capable CAN, LIN, and RS232 transceivers

<8 User LEDs

<Optional: alphanumeric standard LC-Display connectable instead of LEDs

<Reset button, Reset LED

<5 User buttons

<8 MByte FLASH

<2 MByte SRAM

<Connector for Fujitsu Graphic-Controller boards (e.g.: CREMSON-STARTERKITLIME)

<External bus interface routed to 96 pin and 48 pin DIN 41612 (VG) connectors

<Power Supply: 5V, 3.3V, 2.5V and 1.8V

This board must only be used for test applications

in an evaluation laboratory environment.

© Fujitsu Microelectronics Europe GmbH - 7 - FMEMCU-UG-960014-10