Pioneer DJM-5000 About USB-MIDI channel setting, Adjusting the buffer size Windows

Adjusting the buffer size (Windows)

Use this procedure to adjust the computer’s buffer size when using an ASIO audio driver.

Click Windows [START] menu >[View All Program]>[Pioneer]>[DJM-5000]>[DJM-5000 ASIO Settings Utility]

A sufficiently large buffer size decreases the chance of sound dropout (sound interruption) but increases audio signal transmission delay (latency).

!When an application program (DJ software, etc.) with this unit set as a fixed device is running, terminate the program before adjusting the buffer size.

Checking the version of the driver software

Procedure for checking (Windows)

Click Windows [START] menu >[View All Program]>[Pioneer]>[DJM-5000]>[DJM-5000 Version Display Utility]

The [Version] screen appears.

Procedure for checking (Macintosh)

Click [Apple]>[About This Mac]>[More Info]>[Extensions]>[DJM- 5000 USBAudio].

The [Version] screen appears.

Checking the latest information on the driver software

For the latest information on the driver software for exclusive use with this unit, visit our website shown below.

http://www.prodjnet.com/support/

About USB-MIDI channel setting

Turn off the power of this unit in advance.

1Set [MIDI] to [ON]

2Press and hold [FADER START] for [CH-1] and [CH-2] simultaneously and press [POWER]

When the MASTER [CUE] and ZONE [CUE] buttons light orange, the MIDI channel setting mode is set. Press and hold in [FADER START] for [CH-1] and [CH-2] until the buttons light orange.

!The current MIDI channel setting is displayed in the master level indicator. [L] shows the position of 10, while [R] the position of 1.

!The MIDI channel is initially set to [1].

Example: to show 16

14

9

5

2

0

–2

–4

–7

–10

–15

L dB R

3 Press [CUE] in the [MASTER] channel

The MIDI channel changes by one channel each time you press it. Select a MIDI channel to change the setting.

4 Press and hold [CUE] for the [ZONE] channel

Save the changes made for the MIDI channel.

While settings are being saved, [ON/OFF] flashes for the [SOUND MAXIMIZER] channel. Lights up when the saving is completed.

!Do not turn off the power while saving MIDI channel settings.

5 Press [POWER]

Turn off the power of this unit.

6 Press [POWER]

Turn on the power of this unit again.

Start in the normal mode. The MIDI channel setting is changed.

10En