Pioneer EFX-1000 manual Beat Effects

Page 10

EFFECTS (Beat Effects)

EFFECTS

Beat Effects

1. DELAY effect

Adds delay sound to the original sound.

[BPM mode]

A delay sound is added to the original sound at the value set with the TIME dial.

÷The DEPTH dial can be used to adjust the feedback level. Feedback means to input the delay sound back into the delay input. This control allows the amount of the feedback to be adjusted (near the [MAX] setting, the sound level rises).

÷The CHARACTER dial can be used to adjust the amount of filter applied to the feedback sound.

÷The MIX dial can be used to adjust the levels of the original and delay sounds.

TIME

 

level

 

Sound

DEPTH

Time

Original

Feedback

sound

 

Delay sound

Delay block

[RHYTHM mode]

A delay sound set with the TAP button (TAP delay sound) is added to the original sound (Max 8-TAP).

2. ECHO effect

Adds delay sound to the original sound.

[BPM mode]

A delay sound is added to the original sound at the value set with the TIME dial.

[RHYTHM mode]

Adds TAP delay sound to the original sound (Max 8-TAP).

Difference from the DELAY effect:

÷Even if the BEAT EFFECTS lever switch is moved from [ON] to [OFF], the feedback sound or TAP delay sound will continue.

÷In the BPM mode, if the DEPTH dial is set to [MAX] and the BEAT EFFECTS lever switch is moved from [ON] to [OFF], a hold-delay effect will be produced without attenuating the feedback sound (near the [MAX] setting, the sound level rises).

In the RHYTHM mode, when the switch is turned [OFF] the effect will end with the final TAP delay sound for the original sound.

BPM mode

Echo block

RHYTHM mode

TAP 1 echo

block

[RHYTHM mode]

Changes the pitch of the TAP delay sound, and applies the effect to the original sound (Max 4-TAP).

÷The DEPTH dial can be used to adjust the TAP delay level (near the [MAX] setting the sound volume will rise somewhat).

÷The CHARACTER dial can be used to adjust the pitch of the TAP delay sound.

÷The MIX dial can be used to adjust the levels of the original and pitch echo sounds.

TAP 1 pitch echo block.

TAP 2 pitch echo block.

TAP 3 pitch echo block.

TAP 4 pitch echo block.

4. TRANS effect

Cuts the original sound intermittently.

[BPM mode]

Cuts the sound at the interval set by the TIME dial (cuts latter half of the interval).

÷The DEPTH dial can be used to adjust the amount of shift when the sound is cut.

÷The DEPTH dial can be used to adjust the TAP delay level (near the [MAX] setting the sound volume will rise).

÷The CHARACTER dial can be used to adjust the amount of filter applied to the TAP delay sound.

÷The MIX dial can be used to adjust the levels of the original and TAP delay sounds.

TAP 8 echo

block

3. PITCH ECHO effect

Changes the pitch of the delay sound, and applies the effect to the original sound.

DEPTH

MIN

DEPTH

DEPTH

MAX

TIME

Time

TIME

Time

TIME

Time

level

 

 

DEPTH

Sound

 

 

Time

Original

Delay

Delay Delay

Delay

sound

sound

sound sound

sound

TAP 0 TAP 1 TAP 2 TAP 3 TAP 4

TAP 1 delay

block

TAP 8 delay

block

In the same way as for the ECHO effect, the effect sound is maintained even if the BEAT EFFECTS lever switch is set from [ON] to

[OFF].

[BPM mode]

Changes the pitch of the delay sound set with the TIME dial, and applies the effect to the original sound.

÷The DEPTH dial can be used to adjust the feedback level.

÷The CHARACTER dial can be used to adjust the pitch of the delay sound.

÷The MIX dial can be used to adjust the levels of the original and pitch echo sounds.

Pitch echo

block

÷The CHARACTER dial can be used to adjust the phase difference between L and R channels.

 

 

TIME

CHARACTER

L-ch

Time

 

 

 

 

R-ch

 

 

Time

 

 

TIME

CHARACTER

L-ch

 

 

Time

MIN

MAX

R-ch

 

 

 

 

Time

÷The MIX dial can be used to adjust the levels of the original and trans sounds.

10

<DRB1369>

Image 10
Contents Page Importante Contents FeaturesConfirm Accessories BPM Effect TimeBPM Counter Effect Apply the desired effect Digital JOG Break MeterSelect the desired effect Hold buttonConnections Installation LocationCleaning the unit Connection PanelDJ Mixer on DJ mixer provided with Send Connecting the SEND/RETURN Terminals onBasic Connections Return terminalsEffector EFX-1000 Connecting the power cordDJ Mixer DJ CD Player Effects Beat EffectsFlanger effect Phaser effectFilter effect Digital Jog Break Beat effect Effect ParametersEffects Effect Parameters Digital Jog BreakControls and Functions Before USE Controls and FunctionsDELAY, ECHO, Pitch ECHO, TRANS, Flanger FILTER, Phaser Beat Effect sectionDigital Jog Break section ZIP, HUMANIZER, VocoderOperations Character dial Beat Effects BPM modeDepth dial MIX dialUse the Rhythm Mode button to set to rhythm mode Beat Effects Rhythm modeOperations Beat Effects Rhythm mode Press rhythm REC button to set to REC modeOperations Digital Jog Break Jog MemoryHold Function Press the Single or Loop buttonSetting Transmit Midi channel Midi SettingsSetting the Receive Midi channel Midi Implementation Chart Function Transmit Receive CommentsDELAY, ECHO, Pitch Echo Snapshot Program ChangeAbout Rhythm Effects During TransmitTroubleshooting Other TroubleshootingSpecifications Other Specifications