QUICK OPERATION GUIDE (2/3)
BYPASS button
When the button is pressed (button indicator flashes), the signal entering the input connectors is output directly (without modification) to the output connectors.
SIGNAL FLOW switch
Selects the order in which signals are passed through the electronic sections (from beat effect to digital jog break, or vice versa).
USING BEAT EFFECTS [RHYTHM MODE]
1. Select the rhythm input mode.
Press the RHYTHM MODE button so that the button indicator lights.
2. Select effect type.
Press the DELAY, ECHO, PITCH ECHO, TRANS, FLANGER, FILTER or PHASER button and the pressed button starts to flash.
3.Select the sound range for the effect.
Press the button of the frequency (LOW, MID, HI) you wish to affect by the rhythm effect and the corresponding indicator lights.
4.Set to REC mode.
¶When the REC button is pressed, the
BPM display indicates “
”.
¶If no rhythm has been input, the unit will automatically enter the REC mode in step 1.
5.Input the rhythm.
Tap your finger on the TAP button to input the desired rhythm. As you input the rhythm, the rhythm will be calculated and displayed on the RHYTHM TAP display (up to 8 taps with tap interval of 2 seconds or less).
6. Select the overall rhythm time.
The pressed beat select button will light, and the overall rhythm time will be set at the multiple corresponding to the pressed button.
7. Apply an effect.
Press the lever towards you (ON position) to start operation; release it and it returns to the center position (OFF position). In the center position (OFF position), the original sound is not affected. Press the lever away from you to lock it in position so that the rhythm effect is applied also when the lever is released.
EFFECT | DEPTH dial | |
TIME display | ||
Sets the parameter 1 of each | ||
| ||
| effect. |
BPM |
| |
measurement | RHYTHM TAP display | |
mode | ||
| ||
indicators | BPM COUNTER | |
|
BPM MODE button | MIX dial | |
When the BPM MODE button is | Adjusts the balance | |
pressed while in the rhythm | between the original | |
sound and effects. | ||
mode, the mode changes to | ||
| ||
the beat effect BPM mode. |
|
English
CHARACTER dial
Sets the parameter 2 of each effect.
5
<DRB1369>