Pioneer EFX-1000 manual Operations

Page 17

OPERATIONS

OPERATIONS

INPUT LEVEL

FOOT SW

MIDI (TRANSMIT/RECEIVE/OFF)

EFFECT OUT LEV.

English

 

 

 

 

SIGNAL FLOW

METER MODE

BYPASS

 

Adjusting Input Level

Adjust the input level so that the sound is not distorted due to an excessive input level.

7Input signals to the input connectors, and rotate the INPUT LEVEL dial to adjust the level.

Use the METER MODE button to select “input stereo display” (INPUT, L, R indicators light).

If the proper adjustment cannot be obtained without rotating the INPUT LEVEL dial to its extreme [MIN] or [MAX] positions, try changing the position of the rear-panel IN&OUT LEVEL switch (–10dB / +4dB).

Adjusting Effect Output Level

Adjusts the sound level of the effect applied to the input sound signal by the beat effect and the digital jog break.

7Input signals to the input connectors, and rotate the EFFECT OUT LEV. dial to adjust the effect output level.

Use the METER MODE button to select “output stereo display” (OUTPUT, L, R indicators light).

When both the BEAT EFFECTS lever switch and the DIGITAL JOG BREAK lever switch are set to [OFF], the output level is not changed by turning the EFFECT OUT LEV. dial.

Selecting Signal Flow

Select the order in which signal processing occurs (beat effect or digital jog break)

7Use the SIGNAL FLOW switch to select the signal processing order:

When set to the [JOG=BEAT] position, signals are processed for digital jog break effects first, followed by beat effects .

When set to the [BEAT=JOG] position, signals are processed for beat effects first, followed by digital jog break effects.

Selecting Foot Switch Operation

This effector allows connection of an optional foot switch (pedal switch) for ON/OFF control of beat effects and digital jog break effects. Use the foot switch to select the way in which the foot switch operates.

7Set the FOOT SW switch to the desired operating position:

When set to the [JOG] position, the foot switch operates to turn digital jog break effects ON/OFF.

When set to the [BOTH] position, the foot switch operates to turn both digital jog break effects and beat effects ON/OFF.

When set to the [BEAT] position the foot switch operates to

turn beat effects ON/OFF.

*Use a commercially available switching-type foot switch with 6.3 mm monaural phone plug.

Selecting the Level Meter Display

This unit’s level meter can be set to display the desired mode.

7Press the METER MODE button to select the desired mode.

Each time the METER MODE button is pressed, the display switches alternately as follows:

[INPUT] and [OUTPUT] light:

=Input and output level are displayed in monaural. [INPUT] and [L], [R] light:

=Input level is displayed in stereo.

[OUTPUT] and [L], [R] light:

=Output level is displayed in stereo.

Digital Link Function

Fader Effect Function

When the accessory digital link cable is used to connect this unit to a DJ mixer (DJM-1000) with digital link support, send/return connections are completed by a single digital connection, thus enabling fader effect functions that allow the DJ mixer’s fader to be used to perform digital jog break.

Bypass Function

This function allows signals to be output directly, without passing through the effects processing circuitry.

7Press the BYPASS button to make a direct link between input and output.

When the BYPASS button is pressed, the button flashes and input signals are output directly, without passing through the effector circuitry.

When the BYPASS button is flashed, the unit’s controls will have no effect on the input signals.

17

<DRB1369>

Image 17
Contents Page Importante Confirm Accessories FeaturesContents BPM Counter Effect TimeBPM Effect Select the desired effect Digital JOG Break MeterApply the desired effect Hold buttonCleaning the unit Installation LocationConnections Connection PanelBasic Connections Connecting the SEND/RETURN Terminals onDJ Mixer on DJ mixer provided with Send Return terminalsDJ Mixer DJ CD Player Connecting the power cordEffector EFX-1000 Beat Effects EffectsFilter effect Phaser effectFlanger effect Digital Jog Break Effects Effect Parameters Effect ParametersBeat effect Digital Jog BreakBefore USE Controls and Functions Controls and FunctionsBeat Effect section DELAY, ECHO, Pitch ECHO, TRANS, Flanger FILTER, PhaserZIP, HUMANIZER, Vocoder Digital Jog Break sectionOperations Depth dial Beat Effects BPM modeCharacter dial MIX dialOperations Beat Effects Rhythm mode Beat Effects Rhythm modeUse the Rhythm Mode button to set to rhythm mode Press rhythm REC button to set to REC modeHold Function Jog MemoryOperations Digital Jog Break Press the Single or Loop buttonSetting the Receive Midi channel Midi SettingsSetting Transmit Midi channel Function Transmit Receive Comments Midi Implementation ChartDELAY, ECHO, Pitch Echo About Rhythm Effects Program ChangeSnapshot During TransmitOther Troubleshooting TroubleshootingOther Specifications Specifications