Pioneer EFX-1000 Basic Connections, Connecting the SEND/RETURN Terminals on, Return terminals

BEFORE USE (CONNECTIONS)

Basic Connections

Before making or changing the connections, switch off the power switch and disconnect the power cord from the AC outlet.

1. Connecting the SEND/RETURN Terminals on the	÷ If the DJ mixer supports digital link, it can be connected
DJ Mixer (on DJ mixer provided with SEND and	to the EFX LINK connector using the provided digital link
RETURN terminals)	cable to eliminate the need for connection by an analog
÷ Make connections using cables with 1/4-inch/6.3 mm in	6.3mm phone plug cable (audio signals transmitted over
diameter phone plugs.	the digital link cable are in digital format).

÷ Set the DJ mixer so that the SEND and RETURN terminals can be used.

÷ Set the IN & OUT LEVEL switch on the Effector to the [–10 dB] position.

Effector EFX-1000

Stereo Amplifier	FOOT SW
	OUTPUT

INPUT

Foot switch (pedal switch)

EFX LINK

Accessory digital link cable

: Signal flow

MASTER OUT

DJ Mixer

–26 +6

SEND

SEND 1

RETURN

RETURN 1

DJ CD Player CH-1 CH-2

DJ CD Player

2.Connecting a DJ Mixer and an Audio Amplifier (on DJ mixer not provided with SEND and RETURN terminals)

÷Connect using cables with phone plugs (1/4-inch/6.3 mm in diameter) or RCA pin plugs.

8

÷When making connections, do not connect both RCA pin plug cables and phones plug cables for the same connection function (use either one or the other, not both). Also, if you wish to use analog connections, do not also make connections to the digital connectors (digital signals are given priority when connected).

¶For digital connections, use RCA pin-plug coaxial cables. Set the OUTPUT fs SELECT switch in accordance with the connected component.

<DRB1369>