Pioneer VSX-9300TX manual Controls and displays Display, Tuned

Page 34

04Controls and displays

Display

1		2																3					4			5		6		7

8

9

10

11

12

13

14

1 SIGNAL indicators (page 42)

Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically.

2Digital format indicators

•PRO LOGIC II – Lights during Dolby Pro Logic II and Pro Logic IIx processing.

•Neo:6 – Lights during Neo:6 processing with 2- channel sources.

•2 DIGITAL – Lights when a Dolby Digital signal is detected.

•DTS – Lights when a DTS signal is detected.

•ES – Lights when a DTS-ES signal is detected.

•EX – Lights when a Dolby Digital EX signal is detected.

•STEREO – Lights during 2-channel playback.

3LOUDNESS (page 45)

Lights when Loudness listening is active.

4 MIDNIGHT (page 45)

Lights when Midnight listening is active.

5TONE (page 45)

Lights when the tone control is switched on.

6DNR (page 46)

Lights when digital noise reduction is switched on.

7Tuner indicators

STEREO (page 47)

Lights when listening to a stereo FM broadcast in auto/stereo mode.

MONO (page 48)

Lights when the tuner MPX mode is set to mono.

TUNED

Lights when tuned to a broadcast.

8SB CH (page 43)

Indicates the surround back channel (or Virtual Surround Back) setting (AUTO, ON or OFF).

9 Program format indicators

These change according to which channels are active in Dolby, DTS, DVD-A and SACD sources.

LS, S and RS will light at the same time to indicate 6.1 channel sources.

•L – Left front channel

•C – Center channel

•R – Right front channel

•LS – Left surround channel

•S – Surround channel (mono)or surround back channel

•RS – Right surround channel

•LFE – Low frequency effects channel

• – Lights when an LFE signal is detected

10 Speaker indicators (page 67)

Lights to indicate the current speaker system, A and/or B.

11 Listening mode indicators (page 37)

Shows MOVIE or MUSIC when a surround listening mode is selected. DSP will light with a box around it when one of the advanced (DSP) listening modes is selected.

12 Hi-BIT/SAMPLING (page 44)

Lights when the audio scaler is switched on.

13 MULTI-ROOM (page 69)

Lights when the multi room feature is active.

14 Volume level indicator

34

En

Image 34

Contents VSX-9300TX Information to User Risk of Electric Shock Do not OpenImportant Safety Instructions Contents Controlling other equipment Using other functionsAdvanced setup Other connectionsBefore you start FeaturesChecking the supplied accessories Before you start ChapterBefore you start Ventilation Using the remote controlInstalling the receiver Opening the front panelRemote control battery indicator Operating range of the remote controlBefore you start Minute guide Chapter Setting up for Surround SoundMinute guide Introduction to home theater02 5 minute guide Connect your speakersMinute guide Use the on-screen Auto Surround setup to set up your systemLarge Enter ‘Surround Setup’ should be highlighted. Press‘SurrBack System’ should be highlighted. Press Make sure ‘Normal System’ is selected, then select ‘Exit’ ‘Auto Setting’ should be highlighted. PressFollow the instructions on-screen Other problems when using the Auto Surround Setup Checking the settings on your DVD or other playerPlaying a source Connecting your equipment Chapter Connecting your equipmentRear panel Connecting your equipment About the video converterAnalog audio cables Connecting your equipment About cable typesWhen making cable connections Digital audio cablesConnecting your equipment Connecting your TV Connecting your equipment Connecting a DVD player DVD playerConnecting the multichannel analog outputs VSX-9300TXSTB Connecting your equipment Connecting a VCR or DVD recorder Connecting your equipment Connecting other video sources Connecting your equipment Using the component video jacks DVD playerConnecting your equipment Connecting digital audio sources Connecting your equipment Connecting analog audio sources Tape deck, etcPortable DVD player, etc Connecting your equipment Installing your speaker system Placing the speakers Connecting the speakersBare wire connections Banana plug connectionsConnecting external antennas Connecting your equipment Connecting antennasFM wire antenna AM loop antennaPlugging in the receiver Outdoor antenna Indoor antenna Vinyl-coated wire 15-18 ftAbout the AC outlet STANDBY/ON Controls and displaysControls and displays Chapter StereoControls and displays Controls and displays Display TunedControls and displays Remote control TV Input Remote SetupAudio Movie / MusicListening to your system Chapter Listening to your systemAuto playback Listening in surround sound Basic modes Listening to your systemMovie listening modes Advanced effect modesMusic listening modes Dolby Pro Logic IIx Music settingsPro Logic IIx Music See above Neo6 Music settings Listening with headphonesAdjusting the advanced effect level Listening in stereoListening with Acoustic Calibration Listening to your system Selecting the input signal type Press SB CH Mode repeatedly to cycle through Listening to your system Using the surround back channelSurround back channel options Press HI-BIT HI-BIT/HI-SAMPLING on the front Using the audio scaler for Hi-bit and Hi-samplingIf you’re using the remote, press Receiver PanelAdjusting the bass and treble Using the tone controlSwitching the tone control on or off Multi CHReducing noise during playback Release the button when you see the setting you wantListening to dual mono soundtracks Tuning directly to a station Using the tunerUsing the tuner Chapter Finding a stationUsing the tuner MPX modeNaming station presets Listening to memorized station presetsAbcdefghijklmnopqrstuvwxyz Making receiver settings from the Surround Setup menu Surround Setup menuSurround Setup menu Chapter Select the setting you want to adjustNormal surround setting Surround Setup menuSurround back speaker setting Speaker SettingSelect ‘Channel Level’ from the Normal setup menu Channel LevelSelect ‘Speaker Distance’ from the Normal setup menu Speaker DistanceControlling other equipment Using the remote control with other componentsRecalling preset codes Controlling other equipment ChapterProgramming signals from other remote controls Controlling other equipmentGuide Controlling other equipment Controls for TVsMenu DiscDisp Controlling other equipment Controls for other componentsSubtitle ModeTOP ExitProgramming a multi-operation or a shutdown sequence Controlling other equipment Direct functionMulti Operation and System Off Repeat steps 2-4 for as many components as you wantTo add or change a command select ‘Change’ and press Enter Using multi operationsPress Multi Operation Using System off Switching components on and off using the 12 volt triggerOperating other Pioneer components with this unit’s sensor Adjusting the delay of a soundtrack Using other functionsUsing other functions Chapter Making an audio or a video recordingDimming the display Editing remote control display names Using other functions Switching the speaker impedanceAdvanced remote control features Press the Multi Control button for the componentAdjusting the remote control backlight Using other functionsClearing remote control settings Using other functions Resetting the system Other connections Second Zone speaker B setupSwitching the speaker system Other connections ChapterBi-wiring your speakers Other connections Bi-amping your front speakersOther connections Multi-room listening Basic multi-room setupSurrBack System multi-room setup Making multi-room connectionsOther connections Using the multi-room controlsUse the Master Volume dial to adjust the volume Press ControlCnnecting additional amplifiers Other connectionsPress Input on the remote control repeatedly to select USB Other connections Using the USB interfaceUSB terminal on the rear panel of this receiver Advanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputSelect ‘PC Output’ and press Enter System Setup menu Advanced setupAdvanced setup Chapter Select the setting you want to adjust then pressInput Assign menu Advanced setupTHX Cinema Setup Assigning the digital inputsFunction Rename Assigning the component video inputsWhen you’re finished, select ‘Exit’ PHONO/LINE SetupSelect ‘PHONO/LINE Setup’ from the System Setup menu Select either Phono or LineMulti-Room and IR receiver setup Volt TriggerAdvanced setup Expert setup menu Select ‘Expert’ then press EnterAdjust the level of the left channel Select ‘Crossover Network’ from the Expert setup menuSelect ‘Fine Channel Level’ from the Expert setup menu Crossover NetworkSetting the Acoustic Calibration EQ automatically Fine Channel DelayAcoustic Calibration EQ Select the channels you want and adjust to your liking Setting the Acoustic Calibration EQ manuallySelect CUSTOM1 Adjust or CUSTOM2 Adjust Front AlignSelect ‘DATA COPY’ then press Enter Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Select ‘DATA CHECK’ then press EnterHow to interpret the graphical output How to use Professional Acoustic CalibrationProfessional Acoustic Calibration Select ‘Professional’ Using Professional Acoustic CalibrationSelect a setup option If you selected ‘Auto Pro.’, select ‘Start’ and pressSelect ‘Bass Peak Level’ from the Expert setup menu Bass Peak LevelChoose the setting that you want Select ‘D-Range Control’ from the Expert setup menuDynamic Range Control Additional information TroubleshootingPower Additional information ChapterAdditional information No soundOther audio problems Symptom CauseVideo Audio sources onSettings DisplayRemote control USB interfaceAdditional information Additional information Surround sound formats DolbyAdditional information About THX CD-R Additional information Preset code brandsDVD DVRAdditional information Specifications Maintenance of external surfacesOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation