Pioneer VSX-9300TX manual Copying your Acoustic Calibration EQ settings

Advanced setup

Copying your Acoustic Calibration EQ settings

If you want to manually adjust the Acoustic Calibration EQ (see Setting the Acoustic Calibration EQ manually above), we recommend copying the ALL CH ADJUST or the FRONT ALIGN settings from the Auto setup above (or from Automatically setting up for surround sound on page 12) to one of the custom settings. Instead of just a flat EQ curve, this will give you a reference point from which to start.

1Select ‘Acoustic Cal EQ’ from the Expert setup menu.

Expert

[ Crossover Network ]

[ Fine Channel Level ]

[ Fine Channel Delay ]

[	Acoustic Cal EQ	]
[ Bass Peak Level		]
[ D-Range Control		]
[ Exit		]

2 Select ‘DATA COPY’ then press ENTER.

Acoustic Cal EQ

[ EQ AUTO SETTING ] [ CUSTOM1 ADJUST ] [ CUSTOM2 ADJUST ]

[	DATA COPY	]
[	DATA CHECK	]
[ Professional		]
[ Exit		]

11

Checking your Acoustic Calibration EQ settings

If you want to manually adjust the Acoustic Calibration EQ (see Setting the Acoustic Calibration EQ manually above), we recommend copying the ALL CH ADJUST or the FRONT ALIGN settings from the Auto setup above (or from Automatically setting up for surround sound on page 12) to one of the custom settings. Instead of just a flat EQ curve, this will give you a reference point from which to start.

1Select ‘Acoustic Cal EQ’ from the Expert setup menu.

Expert

[ Crossover Network ]

[ Fine Channel Level ]

[ Fine Channel Delay ]

[	Acoustic Cal EQ	]
[ Bass Peak Level		]
[ D-Range Control		]
[ Exit		]

2 Select ‘DATA CHECK’ then press ENTER.

Acoustic Cal EQ

[ EQ AUTO SETTING ] [ CUSTOM1 ADJUST ] [ CUSTOM2 ADJUST ]

[ DATA COPY		]
[	DATA CHECK	]
[	Professional	]
[ Exit		]

3Select CUSTOM1 or CUSTOM2 then use the (cursor up/down) buttons to select the setting you want to copy.

EQ DATA COPY

CUSTOM1

[ ALL CH ADJUST ] CUSTOM2

[ NOT DATA COPY]

[Exit]

•You can also copy from one custom setting to another. For more on the ALL CH ADJUST and FRONT ALIGN settings, see Setting the Acoustic Calibration EQ automatically above.

4 Select ‘Exit’ to copy and confirm.

You will return to the Acoustic Cal EQ setup menu.

3 Select the setting you want to check.

4Select the channels you want, selecting ‘Exit’ when you’re finished checking each one.

5 When you're finished, select ‘Exit’.

You will return to the Acoustic Cal EQ setup menu.

83

En