Pioneer VSX-9300TX manual Listening to your system Selecting the input signal type, Analog

Page 42

05Listening to your system

Selecting the input signal type

Most of the audio inputs have both analog and digital jacks. You can select the type of signal to be used in each case.

The input signal type for the current input is indicated in the display. With digital signals, the signal type (Dolby Digital or DTS) also shows in the display.

The default AUTO setting is usually sufficient, letting the receiver decide the most suitable signal type. However, in other cases (for example, if you want to record the analog output of a digital source) then you should set the input signal type to analog.

RECEIVER

SIGNAL SEL

1Press RECEIVER.

2Press SIGNAL SEL to select the type of input signal for the current source.

Press repeatedly to choose between:

•AUTO – The receiver selects the first available signal in the following order: DIGITAL; ANALOG.

•ANALOG – Selects an analog signal.

•DIGITAL – Selects an optical or coaxial digital signal.

Note

•If no digital inputs are assigned for the current source, the input signal type is fixed to ANALOG.

•When using DIGITAL IN terminals the following digital signal formats are supported: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2 and 96 kHz sampling frequencies). If your source is not supported, select

ANALOG.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

•The audio signal from karaoke microphones and some LDs is not output from the digital outputs. Select ANALOG to listen to these formats.

•If you want to play DTS-encoded sources, you need to have digital connections. If ANALOG is selected, you’ll hear digital noise through your speakers.

42

En

Image 42

Contents VSX-9300TX Information to User Risk of Electric Shock Do not OpenImportant Safety Instructions Contents Controlling other equipment Using other functionsAdvanced setup Other connectionsBefore you start FeaturesChecking the supplied accessories Before you start ChapterBefore you start Ventilation Using the remote controlInstalling the receiver Opening the front panelOperating range of the remote control Remote control battery indicatorBefore you start Minute guide Chapter Setting up for Surround SoundMinute guide Introduction to home theater02 5 minute guide Connect your speakersUse the on-screen Auto Surround setup to set up your system Minute guideLarge ‘Surround Setup’ should be highlighted. Press Enter‘SurrBack System’ should be highlighted. Press ‘Auto Setting’ should be highlighted. Press Make sure ‘Normal System’ is selected, then select ‘Exit’Follow the instructions on-screen Checking the settings on your DVD or other player Other problems when using the Auto Surround SetupPlaying a source Connecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment About the video converterAnalog audio cables Connecting your equipment About cable typesWhen making cable connections Digital audio cablesConnecting your equipment Connecting your TV Connecting your equipment Connecting a DVD player DVD playerConnecting the multichannel analog outputs VSX-9300TXSTB Connecting your equipment Connecting a VCR or DVD recorder Connecting your equipment Connecting other video sources Connecting your equipment Using the component video jacks DVD playerConnecting your equipment Connecting digital audio sources Connecting your equipment Connecting analog audio sources Tape deck, etcPortable DVD player, etc Connecting your equipment Installing your speaker system Placing the speakers Connecting the speakersBare wire connections Banana plug connectionsConnecting external antennas Connecting your equipment Connecting antennasFM wire antenna AM loop antennaOutdoor antenna Indoor antenna Vinyl-coated wire 15-18 ft Plugging in the receiverAbout the AC outlet STANDBY/ON Controls and displaysControls and displays Chapter StereoControls and displays Controls and displays Display TunedControls and displays Remote control TV Input Remote SetupAudio Movie / MusicListening to your system Listening to your system ChapterAuto playback Listening in surround sound Basic modes Listening to your systemMovie listening modes Advanced effect modesDolby Pro Logic IIx Music settings Music listening modesPro Logic IIx Music See above Neo6 Music settings Listening with headphonesAdjusting the advanced effect level Listening in stereoListening with Acoustic Calibration Listening to your system Selecting the input signal type Listening to your system Using the surround back channel Press SB CH Mode repeatedly to cycle throughSurround back channel options Press HI-BIT HI-BIT/HI-SAMPLING on the front Using the audio scaler for Hi-bit and Hi-samplingIf you’re using the remote, press Receiver PanelAdjusting the bass and treble Using the tone controlSwitching the tone control on or off Multi CHRelease the button when you see the setting you want Reducing noise during playbackListening to dual mono soundtracks Tuning directly to a station Using the tunerUsing the tuner Chapter Finding a stationUsing the tuner MPX modeListening to memorized station presets Naming station presetsAbcdefghijklmnopqrstuvwxyz Making receiver settings from the Surround Setup menu Surround Setup menuSurround Setup menu Chapter Select the setting you want to adjustNormal surround setting Surround Setup menuSurround back speaker setting Speaker SettingSelect ‘Channel Level’ from the Normal setup menu Channel LevelSelect ‘Speaker Distance’ from the Normal setup menu Speaker DistanceControlling other equipment Using the remote control with other componentsRecalling preset codes Controlling other equipment ChapterProgramming signals from other remote controls Controlling other equipmentGuide Controlling other equipment Controls for TVsMenu DiscDisp Controlling other equipment Controls for other componentsSubtitle ModeTOP ExitProgramming a multi-operation or a shutdown sequence Controlling other equipment Direct functionMulti Operation and System Off Repeat steps 2-4 for as many components as you wantUsing multi operations To add or change a command select ‘Change’ and press EnterPress Multi Operation Switching components on and off using the 12 volt trigger Using System offOperating other Pioneer components with this unit’s sensor Adjusting the delay of a soundtrack Using other functionsUsing other functions Chapter Making an audio or a video recordingDimming the display Editing remote control display names Using other functions Switching the speaker impedanceAdvanced remote control features Press the Multi Control button for the componentUsing other functions Adjusting the remote control backlightClearing remote control settings Using other functions Resetting the system Other connections Second Zone speaker B setupSwitching the speaker system Other connections ChapterBi-wiring your speakers Other connections Bi-amping your front speakersOther connections Multi-room listening Basic multi-room setupSurrBack System multi-room setup Making multi-room connectionsOther connections Using the multi-room controlsUse the Master Volume dial to adjust the volume Press ControlCnnecting additional amplifiers Other connectionsOther connections Using the USB interface Press Input on the remote control repeatedly to select USBUSB terminal on the rear panel of this receiver Other connections Connecting a PC for Advanced Mcacc output Advanced Mcacc output using your PCSelect ‘PC Output’ and press Enter System Setup menu Advanced setupAdvanced setup Chapter Select the setting you want to adjust then pressInput Assign menu Advanced setupTHX Cinema Setup Assigning the digital inputsFunction Rename Assigning the component video inputsWhen you’re finished, select ‘Exit’ PHONO/LINE SetupSelect ‘PHONO/LINE Setup’ from the System Setup menu Select either Phono or LineMulti-Room and IR receiver setup Volt TriggerAdvanced setup Expert setup menu Select ‘Expert’ then press EnterAdjust the level of the left channel Select ‘Crossover Network’ from the Expert setup menuSelect ‘Fine Channel Level’ from the Expert setup menu Crossover NetworkFine Channel Delay Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Select the channels you want and adjust to your liking Setting the Acoustic Calibration EQ manuallySelect CUSTOM1 Adjust or CUSTOM2 Adjust Front AlignSelect ‘DATA COPY’ then press Enter Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Select ‘DATA CHECK’ then press EnterHow to use Professional Acoustic Calibration How to interpret the graphical outputProfessional Acoustic Calibration Select ‘Professional’ Using Professional Acoustic CalibrationSelect a setup option If you selected ‘Auto Pro.’, select ‘Start’ and pressSelect ‘Bass Peak Level’ from the Expert setup menu Bass Peak LevelSelect ‘D-Range Control’ from the Expert setup menu Choose the setting that you wantDynamic Range Control Additional information TroubleshootingPower Additional information ChapterAdditional information No soundOther audio problems Symptom CauseVideo Audio sources onSettings DisplayRemote control USB interfaceAdditional information Additional information Surround sound formats DolbyAdditional information About THX CD-R Additional information Preset code brandsDVD DVRAdditional information Specifications Maintenance of external surfacesTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation