11Advanced setup
Chapter 11
Advanced setup
The System Setup menu
The System Setup menu is where you can make customized settings to reflect how you are using the receiver.
1Switch on the receiver and your TV.
2Using the remote control, press RECEIVER, then press the SYSTEM SETUP button.
An
items.
RECEIVER
RECEIVER
SYSTEM SETUP
ENTER
Tip
•You can also use the front panel display to make settings. You can also use the MULTI JOG dial and
ENTER on the front panel instead of the (cursor up/down) buttons and ENTER on the remote control.
3Select the setting you want to adjust then press
ENTER.
System Setup |
| |||
[ |
|
| ] | |
1. Surround Setup | ||||
[ 2. THX CINEMA Setup ] | ||||
[ 3. Input Assign | ] | |||
[ 4. | Function Rename | ] | ||
[ 5. | PHONO/LINE Setup ] | |||
[ 6. | Multi Room | ] | ||
[ 7. | 12V Trigger | ] | ||
[ Exit | ] | |||
|
|
|
|
|
•Surround Setup – Access the setup menu for basic surround sound settings (see Making receiver settings from the Surround Setup menu on page 50 for more on this).
•THX CINEMA Setup – Select the decoding method used with the THX CINEMA mode (see THX CINEMA Setup below).
•Input Assign – Specify what you’ve connected to the digital and component video inputs (see The Input Assign menu below).
•Function Rename – Change the names that appear on the receiver display and
•PHONO/LINE Setup – Specify how you’re using the PHONO jack on the rear of the receiver (see PHONO/ LINE Setup on page 77).
•Multi Room – Specify your volume setting for a
•12V Trigger – Specify which components are switched on or off using the 12 volt trigger (see 12 Volt Trigger on page 78).
4Make the adjustments necessary for each setting, pressing ENTER to confirm after each setting.
74
En