Roland VS-700R owner manual How to Install an Expansion Board

Page 22

Installing the ARX Expansion Board

How to Install an Expansion Board

Install the Expansion Board after removing the panel cover.

1.Before installing the Expansion Board, turn off the power of the VS-700R and all connected devices, and disconnect all cables, including the Power cable, from the VS-700R.

2.From the VS-700R, remove only the screws shown in the following diagram, and detach the cover.

VS-700R Top Panel

3.Orient the board with the slot of the VS-700R as shown in the illustration. Slot of the VS-700R

Latched holders

Board

(expansion board)

Roland logo

Non-latched holders

Holes that engage the non-latched holders

22

Image 22

Contents Read this First Important Safety Instructions Never install the unit in any of the following locations Using the Unit Safely Using the Unit Safely Important Notes Important Notes Contents Checking the Contents of the Package USB Cable Using the VS-700R I/O in Standalone Mode Changes to the SettingsConnecting Two VS-700R I/O Units Advantages of Connecting VS-700R I/O UnitsExample connections for monitoring Connect the WordclockConnecting the Power Cord Turning the Power On If the USB indicator of the VS-700R I/O unit isn’t litConnecting Recording Equipment Connections to the Analog JacksConnections to the Digital Connectors Connecting a Digital Audio SourceSwitching the Sampling Rate Setting SONAR’s Sampling Rate pSetting SONAR’s Sampling Rate Restart SonarSetting Screen label Explanation Audio Clock SourceInstalling the ARX Expansion Board Port settings Midi input and audio outputHow to Install an Expansion Board Install the Expansion Board after removing the panel coverBoard Removing an Expansion Board Installation de la carte d’expansion French Language for Canadian Safety StandardInstallation d’une carte d’expansion CarteCarte Retrait d’une carte d’expansion Attaching the Rackmount Brackets For EU Countries Declaration of Conformity Compliance Information Statement