Roland VS-700R owner manual Removing an Expansion Board

Page 24

Installing the ARX Expansion Board

Removing an Expansion Board

To remove an expansion board, reverse the process by which you inserted it.

1.Unlatch the latched board holders.

2.Verify that the two latched board holders are unlocked, then gently pull up the board and disconnect the connector.

3.Disengage the board from the non-latched board holders, and remove the board.

4.Attach the cover by reversing step 2 of the installation process.

24

Image 24

Contents Read this First Important Safety Instructions Never install the unit in any of the following locations Using the Unit Safely Using the Unit Safely Important Notes Important Notes Contents Checking the Contents of the Package USB Cable Using the VS-700R I/O in Standalone Mode Changes to the SettingsConnecting Two VS-700R I/O Units Advantages of Connecting VS-700R I/O UnitsExample connections for monitoring Connect the WordclockConnecting the Power Cord Turning the Power On If the USB indicator of the VS-700R I/O unit isn’t litConnecting Recording Equipment Connections to the Analog JacksConnections to the Digital Connectors Connecting a Digital Audio SourceSwitching the Sampling Rate Setting SONAR’s Sampling Rate pSetting SONAR’s Sampling Rate Restart SonarSetting Screen label Explanation Audio Clock SourceInstalling the ARX Expansion Board Port settings Midi input and audio outputHow to Install an Expansion Board Install the Expansion Board after removing the panel coverBoard Removing an Expansion Board Installation de la carte d’expansion French Language for Canadian Safety StandardInstallation d’une carte d’expansion CarteCarte Retrait d’une carte d’expansion Attaching the Rackmount Brackets For EU Countries Declaration of Conformity Compliance Information Statement