Roland VS-700R owner manual Board

Page 23

Installing the ARX Expansion Board

4.Insert the board into the VS-700R’s non-latched board holders until you hear a click.

Board

Connector

of board Align board’s

holes with holders

Connector

of the VS-700R

Non-latched holders

5.Gently lower the board into place.

6.From above, press down on the board at the three locations indicated in the illustration until the latched board holders lock into place.

Edge of the board where the logo is affixed

Near the cutouts in the board

7.Verify that the latched board holders are locked.

8.Use the screws that you removed in step 2 to fasten the cover back in place.

23

Image 23

Contents Read this First Important Safety Instructions Never install the unit in any of the following locations Using the Unit Safely Using the Unit Safely Important Notes Important Notes Contents Checking the Contents of the Package USB Cable Changes to the Settings Using the VS-700R I/O in Standalone ModeAdvantages of Connecting VS-700R I/O Units Connecting Two VS-700R I/O UnitsConnect the Wordclock Example connections for monitoringConnecting the Power Cord If the USB indicator of the VS-700R I/O unit isn’t lit Turning the Power OnConnections to the Analog Jacks Connecting Recording EquipmentConnecting a Digital Audio Source Connections to the Digital ConnectorsSetting SONAR’s Sampling Rate p Switching the Sampling RateRestart Sonar Setting SONAR’s Sampling RateAudio Clock Source Setting Screen label ExplanationPort settings Midi input and audio output Installing the ARX Expansion BoardInstall the Expansion Board after removing the panel cover How to Install an Expansion BoardBoard Removing an Expansion Board French Language for Canadian Safety Standard Installation de la carte d’expansionCarte Installation d’une carte d’expansionCarte Retrait d’une carte d’expansion Attaching the Rackmount Brackets For EU Countries Compliance Information Statement Declaration of Conformity