Roland VS-700R owner manual Contents

Page 8

Contents

USING THE UNIT SAFELY	3
IMPORTANT NOTES	6
Checking the Contents of the Package	9
Using the VS-700R I/O in Standalone Mode	11
Connecting Two VS-700R I/O Units	12
Connecting the Power Cord	14
Turning the Power On	15
Connecting Recording Equipment	16
Switching the Sampling Rate	18
Audio Clock Source	20
Installing the ARX Expansion Board	21
Installation de la carte d’expansion	25
Attaching the Rackmount Brackets	29

8

Image 8

Contents Read this First Important Safety Instructions Never install the unit in any of the following locations Using the Unit Safely Using the Unit Safely Important Notes Important Notes Contents Checking the Contents of the Package USB Cable Using the VS-700R I/O in Standalone Mode Changes to the SettingsConnecting Two VS-700R I/O Units Advantages of Connecting VS-700R I/O UnitsExample connections for monitoring Connect the WordclockConnecting the Power Cord Turning the Power On If the USB indicator of the VS-700R I/O unit isn’t litConnecting Recording Equipment Connections to the Analog JacksConnections to the Digital Connectors Connecting a Digital Audio SourceSwitching the Sampling Rate Setting SONAR’s Sampling Rate pSetting SONAR’s Sampling Rate Restart SonarSetting Screen label Explanation Audio Clock SourceInstalling the ARX Expansion Board Port settings Midi input and audio outputHow to Install an Expansion Board Install the Expansion Board after removing the panel coverBoard Removing an Expansion Board Installation de la carte d’expansion French Language for Canadian Safety StandardInstallation d’une carte d’expansion CarteCarte Retrait d’une carte d’expansion Attaching the Rackmount Brackets For EU Countries Declaration of Conformity Compliance Information Statement