Roland VS-700R Connections to the Digital Connectors, Connecting a Digital Audio Source

Page 17

Connecting Recording Equipment

Connections to the Digital Connectors

Connecting a Digital Audio Source

If you want to digitally connect a DAT or similar device, connect its output connector (e.g., DIGITAL OUT connector) to the VS-700R's DIGITAL IN connector.

VS-700R Rear Panel

		Using an
	If you're connecting an ADAT device,	AES/EBU
	If you're connecting an ADAT device,	connector
	connect it to the ADAT connector.	connector
	connect it to the ADAT connector.
	A maximum of eight channels can be input

Using

acoaxial

connector

The DIGITAL 1 coaxial connector and AES/EBU connector are a mutually exclusive selection. To make your choice, go to SONAR’s “Tools” menu, open “ VS-700,” select the “MIC PRE” tab, and make the desired setting in the “DIGITAL 1 INPUT” field.

Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:

1.Changing the orientation of the microphone(s).

2.Relocating microphone(s) at a greater distance from speakers.

3.Lowering volume levels.

17

Image 17

Contents Read this First Important Safety Instructions Never install the unit in any of the following locations Using the Unit Safely Using the Unit Safely Important Notes Important Notes Contents Checking the Contents of the Package USB Cable Changes to the Settings Using the VS-700R I/O in Standalone ModeAdvantages of Connecting VS-700R I/O Units Connecting Two VS-700R I/O UnitsConnect the Wordclock Example connections for monitoringConnecting the Power Cord If the USB indicator of the VS-700R I/O unit isn’t lit Turning the Power OnConnections to the Analog Jacks Connecting Recording EquipmentConnecting a Digital Audio Source Connections to the Digital ConnectorsSetting SONAR’s Sampling Rate p Switching the Sampling RateRestart Sonar Setting SONAR’s Sampling RateAudio Clock Source Setting Screen label ExplanationPort settings Midi input and audio output Installing the ARX Expansion BoardInstall the Expansion Board after removing the panel cover How to Install an Expansion BoardBoard Removing an Expansion Board French Language for Canadian Safety Standard Installation de la carte d’expansionCarte Installation d’une carte d’expansionCarte Retrait d’une carte d’expansion Attaching the Rackmount Brackets For EU Countries Compliance Information Statement Declaration of Conformity