The Triggers
6.7 The Add Timer Trigger
The Add Timer trigger lets the control system wait for a defined time or event to occur and then act accordingly.
6.7.1Power ON Example
In the following example, button 3 on the
If a suitable reply is received within the
Figure 63: Timer Trigger Flowchart – Power ON Example
This setup includes three simple steps:
Step I: Define the Timer Trigger
Step II: Define the Button trigger (which includes the Timer Trigger Start state)
Step III: Define the Monitor Event Trigger (which includes the Timer Trigger Stop state)
Step I: Define the Timer Trigger
1.Click the Add Timer button.
The Timer Trigger Name window appears. Type the Trigger name (for example, PRJON):
Figure 64: The Timer Trigger Name Window (Power ON)
2.Click OK.
The Timer trigger appears (in red) in the available triggers list:
36 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |