Kramer Electronics Revision 6 manual Kramer K-Config Menus, File Menu Features

The Kramer K-Config Menus

10The Kramer K-Config Menus

This section describes the Kramer K-Configmenus.

10.1The File Menu

Figure 169 illustrates the File menu and Table 16 defines it:

	Table 16: File Menu Features
	Menu Command			Function
	New Project	1		Click to create a new setup, see Section
				10.1.12.
	Open Project			Open an existing setup
	Save Project			Click to save the current setup
	Save as Project			Save the setup under a different name
		3	…	Click to load a saved configuration.
	Load Configuration
	Import Devices…			Click to import a new or existing device		4
	Export Device…			Click to export a device	5
	Driver Manager …			Click to open the Driver Manager window
	Change Working				6
	Directory…			Click to set the new working directory .
Figure 169: The File Menu	Exit			Click to exit the program.

10.1.1Starting a New Project

To start a new project, do the following:

1. Click the New Project button in the file menu, the following window appears:

Figure 170: New Project Warning

2. The Save as Window appears to let you save the new project under a new name:

Figure 171: Project Save as Window

1 A Project includes the configuration and the drivers

2 This will discard the active configuration

3 A configuration does not include the drivers

4 To import one or several new and/or revised device layouts to K-Config, virtual device layouts created in other K-Config installations 5 To export virtual device layouts to other K-Config installations

6 The working directory can be changed at any time

81