Set
8Set K-NET IDs
In a room setup, the auxiliary devices connected to the Master RC are daisy chained via
To set the
1.Right click the required auxiliary device in the Control room area and select Set
Figure 127: Configuration Mismatch Warning
2.Connect the auxiliary device directly to the PC (via USB) and then click OK. The Connect window appears:
Figure 128: The K-NET ID Connect Window
3.Click OK to connect.
The setting K-NET ID window appears.
Figure 129: Setting K-NET ID
4. Click OK to set the ID number.
1 The ID number of the Master RC is always 1 and the ID numbers allocated to the Virtual devices are 11 and 12
59