Yorkville Sound YS1080 owner manual Input Channels 9/10 and 11/12

mc12d

10. Pan Control

The Pan control affects the main-mix signal (only) going to the L & R masters and the Media Out jacks.

11. Mute Button

The Mute Switch disconnects the specified channel from all outputs. The channel can still be monitored through the Phones and on the VU-Meter when the Solo is activated in PFL mode.

1

Mute

8Clip Lmt

3

Act

12. Clip LED

The Clip LEDs Indicate the input Limiter’s capacity has been exceeded, reduce the Gain setting when illuminated.

13. Limit LED

The Limit LEDs Indicate input Limiter activity. The bright- ness of the yellow Limit LED indicates the amount of gain reduction or compression.

14. Activity LED (Act)

The Act LED indicates channel signal activity (i.e. that signal is present in the channel).

15. Solo Button

When depressed, the Solo Switch isolates the selected channel through Phones and on the VU-Meter.

+ +

0	0
-	-

3

6Solo

12 12

24 24

0 0 0 0

Line

Mic

2-TRK In

Gain 0

-6 +10

-20+20

-36 dB +40

2-TRK Level

4 5 6

37

28

19

9 0 10 10

16. Channel Fader

The channel fader sends channel output to the L&R Masters and the Media outputs.

Input Channels 9/10 and 11/12

1. L&R Line Inputs

The L&R ¼-inch Line Inputs will accept balanced or unbalanced cables from keyboards, etc.

2. Mic Input

The Mic inputs accept standard low-impedance XLR mic-level input.

3. L&R RCA 2-Trk Input Jacks

The L&R RCA 2-Trk inputs can be used for audio signals from CD players, computers, iPods, etc.

4. Gain Control

The channel’s Gain control regulates the L&R Line and Mic input signals.

5. 2-TRK Level Control

The 2-TRK Level Control regulates the 2-Trk (track) input signals only.

Note: Either the Line, or Mic input (not both), can be used along with the 2-Trk inputs simultaneously.

6. Equalization

The Low and High EQ controls are shelving at 80 Hz & 12 kHz respectively, Mid = bandpass at 1 kHz, all with +/-15 dB range.

3