AKG Acoustics C 411 manual Connecting the cable Push the mini XLR Using

2 Interfacing

1. Connecting the cable: Push the mini XLR	2.3.2 Using the
connector (1) on the pickup cable into the mini	MPA III L
XLR socket (2) on the cable of the MPA III L (3)
to the stop.	Refer to fig. 4.
The connector will lock automatically.

	Mini XLR	Mini XLR	MPA
MPA	Phantom

Fig. 4: Connection diagram with MPA III L.

Disconnecting the cable: Refer to section

2.3.1 above.

2.Connect the MPA III L (3) to a balanced XLR microphone input with phantom power.

3.Switch the phantom power on. (Refer to the in- struction manual of the unit to which you connected your pickup.)

4.If your mixer provides no phantom power: Refer to fig. 4. Connect the MPA III L (3) to an optional AKG

phantom power supply (4) (N 62 E, N 66 E, B 18, B 15) and use an XLR cable (5) (e.g., an optional MK 9/10 from AKG) to connect the phantom power supply (4) to the desired balanced input.

Refer to the manual of your bodypack transmitter. 2.3.3 Connecting to a Bodypack Transmitter

17