AKG Acoustics C 411 manual Interfacing, Introduction

2 Interfacing

2.1 Introduction

( Important!

The C 411III pickup is a condenser transducer and therefore needs a power supply.

Using any power supply other than those recommended by AKG may damage your pickup and will void the warranty.

2.2C 411III PP 1. Connect the phantom power adapter (1) on the

2.2.1Connecting pickup cable to a balanced XLR microphone

to Balanced input with phantom power.

Inputs 2. Switch the phantom power on. (Refer to the in-

struction manual of the unit to which you

Refer to fig. 1. connected your pickup.)

3.If your mixer provides no phantom power: Connect the phantom power adapter (1) to an optional AKG phantom power supply (2) (N 62 E, N 66 E, B 18, B 15) and use an XLR cable (3) (e.g., an optional MK 9/10 from AKG) to connect the phantom power supply to the desired balanced input.

	MPA
MPA	Phantom

Fig. 1: Connecting to a balanced input.

14