Xantrex Technology XDC 60-100SL, XDC 6000 manual Table A.3Specifications for 80V to 600V Models

TM-XDSL-01XN.book Page 25 Tuesday, November 5, 2002 3:22 PM

Specifications and Characteristics

Electrical Specifications—Summary

Table A.3Specifications for 80V to 600V Models

Models	80–75	100–60	150–40	300–20	600–10
Output Ratings:
Output Voltage 1	0–80 V	0–100 V	0–150 V	0–300 V	0–600 V
Output Current 2	0–75 A	0–60 A	0–40 A	0–20 A	0–10 A
Output Power	6000 W	6000 W	6000 W	6000 W	6000 W
Line Regulation: 3
Voltage (0.01% of Vmax)	8 mV	10 mV	15 mV	30 mV	60 mV
Current (0.05% of Imax)	37.5 mA	30 mA	20 mA	10 mA	5 mA
Load Regulation: 4
Voltage (0.05% of Vmax + 5 mV)	45 mV	55 mV	80 mV	155 mV	305 mV
Current (0.1% of Imax + 20 mA)	95 mA	80 mA	60 mA	40 mA	30 mA
Output Noise (0–20 MHz):
Voltage (p–p)	100 mV	100 mV	150 mV	250 mV	350 mV
Output Ripple (rms):
Voltage	15 mV	20 mV	20 mV	30 mV	80 mV
Current 5	320 mA	230 mA	120 mA	50 mA	25 mA
OVP Adjustment Range:
(0% to 110% of Vmax)	0–88 V	0–110 V	0–165 V	0–330 V	0–660 V
Efficiency: 6	0.89	0.90	0.90	0.91	0.91

1.Minimum output voltage is <0.3% of rated voltage at zero output setting.

2.Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.

3.For input voltage variation over the AC input voltage range, with constant rated load.

4.For 0–100% load variation, with constant nominal line voltage.

5.Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.

6.Typical efficiency at nominal input voltage and full output power.

Table A.4Drift Specifications for 80V to 600V Models

Models	80–75	100–60	150–40	300–20	600–10
Drift (30 minutes): 1
Voltage (0.04% of Vmax)	32 mV	40 mV	60 mV	120 mV	240 mV
Current (0.6% of Imax)	450 mA	360 mA	240 mA	120 mA	60 mA
Drift (8 hours): 2
Voltage (0.02% of Vmax)	16 mV	20 mV	30 mV	60 mV	120 mV
Current (0.04% of Imax)	30 mA	24 mA	16 mA	8 mA	4 mA
Temperature Coefficient: 3
Voltage (0.04% of Vmax/°C)	32 mV	40 mV	60 mV	120 mV	240 mV
Current (0.06% of Imax/°C)	45 mA	36 mA	24 mA	12 mA	6 mA

1.Maximum drift over 30 minutes with constant line, load, and temperature, after power on.

2.Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.

3.Change in output per °C change in ambient temperature, with constant line and load.

Release 1.0 25