Honeywell PDX265T*F(BN,SX,CX), PDX75S70F(B,S,C)*(N,X), PDX450S*F(BN,SX) Specifications, PDX Series

PDX Series

Specifications

Power supply	Dedicated 115VAC, 60 Hz, 15A
Gas Supply Pipe	Minimum 1/2" NPT (schedule 40 black iron pipe recommended)
Approved Gas Type	Natural or Propane. Unit must match gas type supplied.
Gas Pressure	5.0" W.C. min. for Nat gas, 11.0" W.C. min. for L.P. gas, 14.0" W.C. maximum (Nat. & L.P.)
Venting System	Power direct vent through the wall or vertical through the roof
Approved Vent Materials	PVC, CPVC or ABS
Minimum Clearance	18" from top, 24" from front, 4" sides and rear.
for Servicing
Water Supply Pressure	150 PSI maximum allowable working pressure. Check local codes for supply pressure
Thermal well TCO Limit	Residential 188°F (87°C), Commercial 199°F (93°C)
Residential Temperature	60°F (16°C) to 160°F (71°C) (Approximate temperatures)
Set Point Range
Commercial Temperature	80°F (27°C) to 180°F (82°C) (Approximate temperatures)
Set Point Range
Blower Temperature Switch	Normally closed, opens @ 155°F (68°C), auto reset @ 128°F (54°C).
Pressure switch	Standard Altitude-Normally open, closes at differential pressure of -.80.
	High Altitude-Normally open, closes at differential pressure of -.73.
Blower	115VAC, 60Hz, 3.1 amps.

Page 6

6