Extron electronic IPL T CR48 Specifications, Part Numbers, Accessories, Relay control interface

Specifications, Part Numbers, Accessories

Specifications

Ethernet control interface

Connectors	1 RJ-45 female connector
Data rate	10/100Base-T, half/full duplex with
	autodetect
Protocols	ARP, DHCP, ICMP (ping), TCP/IP, UDP/
	IP, Telnet, HTTP, SMTP
Default settings	Link speed and duplex level =
	autodetected
	IP address = 192.168.254.254
	Subnet mask = 255.255.0.0
	Gateway = 0.0.0.0
	DHCP = off
Web server	Up to 200 simultaneous sessions
	1.25 MB nonvolatile user memory
Program control	Extron’s Simple Instruction Set (SIS™)
Global Viewer requirements	Microsoft® Internet Explorer ver. 6 or
	higher

Relay control interface

Quantity/type	8 normally open relays
Relay control connectors	(2) 3.5 mm captive screw connectors, 8
	pole
Relay control contact rating	24 V, 1 A

Contact closure control interface

Quantity/type	4 contact closure inputs
Contact input control connector..	(1) 3.5 mm captive screw connector, 5 pole
Contact closure (input only)
Input voltage range	0 to 5 VDC, clamped at +5.1 V
Input impedance	10k ohms
Threshold	1.6 VDC
Pin configurations	1, 2, 3, 4 = inputs 1, 2, 3, 4; 5 = GND

General

Power	Supplied by an included external power
	supply
External power supply	100 VAC to 240 VAC, 50/60 Hz, external;
	to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.5 A

A-2 IPL T CR48 • Specifications, Part Numbers, and Accessories