Extron electronic IPL T CR48 Communication and Control, cont’d, 6 - Web server passwords screen

Communication and Control, cont’d

Figure 4-6 — Web server passwords screen

4.Once passwords have been set, you will be required to enter a password (figure 4-2) whenever you log on to the unit.

NTo clear a password, enter a single space, repeat the entry, and click the Submit button.

NIf there is no administrator password, your password will not be saved.

Editing and adding e-mail alerts

If you have created scheduled events or monitoring tasks on the IPL T CR48 interface, you can write an e-mail alert with a message corresponding to that event or task (e.g., a timer notification indicating it’s time to replace a projector light bulb). The e-mail alert can notify up to eight recipients at one time.

To edit notification e-mail addresses from the Email Alerts page:

1.Click Email Alerts on the menu (on the left side of the window) and the Email Alerts screen (figure 4-7) is displayed.

2.Click the Edit button to go into edit mode.

3.Add, update, or change the IP address and domain name of your mail server under Email Settings.

4.Click the Save button to keep changes.

5.Click on the Edit buttons to independently edit each e-mail address and file name.

a.Enter the e-mail address of the alert recipient in one of the numeric mailboxes under E-mail Address.

b.Enter the name of the file containing the alert message under File Name.

c.Click the Save button to keep changes to recipient e-mail addresses and file names.

CFile names must end with a .eml extension.

4-6 IPL T CR48 • Communication and Control