Raymarine ST60 manual Display illumination, Remote control

6 ST60 Wind & Close Hauled Wind Instrument Owner’s Handbook

1.3 Display illumination

When the instrument is first powered up, the display illumination is set to its lowest (courtesy) level, to facilitate initial access to the keys.

To adjust the level of display illumination:

1.Hold down the disp key for approximately one second, to enter the illumina- tion-adjust mode.

2.There are four preset illumination levels. Momentarily press the disp key to cycle through these levels until you reach the level you want.

3.Press any other key to leave the illumination-adjust mode.

Note: The digital display will return to normal operation 7 seconds after the last key press.

1.4 Remote control

When connected to SeaTalk, the ST60 Wind and Close Hauled Wind instruments can be controlled remotely with a SeaTalk Remote Keypad Unit. When any instrument on the SeaTalk bus is selected, the TRUE/APP indicators on the digital display will flash to indicate that the keypad has control.

Details on how to use the remote control facility can be found in the SeaTalk Remote Keypad Owner’s Handbook.