VXI VT1538A user manual SENSePERiodLIMitUPPer?, SENSePERiodMODE

Page 63

[SENSe:]PERiod:LIMit:UPPer?

[SENSe:]PERiod:LIMit:UPPer? <channel> returns the upper period limit currently set for <channel>

Parameters


	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units

	channel	string	100 - 163	none

Comments •

•

SENSe:PERiod:MODE

<channel> must be a single channel on an E1538A SCP.

RETURNS: .004 to 60, Type is float32.

SENSe:PERiod:MODE <mode>,(@<ch_list>) selects the measurement

interval mode the SCP will use to measure the signal period. This can be set as a fixed amount of time (APERture), or a fixed number of signal periods (NPERiods).

Parameters

	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units

	mode	discrete (string)	APERture NPERiods	none

	ch_list	string	100 - 163	none

Comments • The SENS:PER:APERture command sets the aperture value. The SENS:PER:NPERiods command sets the nperiods value.

•<ch_list> must be channels on E1538A SCPs.

•Related Commands: SENS:PER:APERture, SENS:PER:NPERiods, SENS:FUNC:PER, SENS:PER:LIM:UPPer

•*RST Condition: is “APERture”.

•.Send with VXIplug&play Function: hpe14XX_cmd(...)

Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 59

Image 63

Contents VT1538A VXI Technology, Inc Introduction Support Resources User’s and Scpi Programming Manual Page About this Manual Agilent E1538A Enhanced Frequency/Totalize/PWM SCPIntroduction Identifying the Plug-on Important Switch Location and Example Settings Setting Configuration SwitchesConnecting To The Terminal Module InstallationE1419A Option 11 Terminal Module Connections Recommended Signal ConnectionsRecommended Connections and Voltage Limits Input and Output CharacteristicsE1538A Input/Output Characteristics VRS Mode Input Operation SCP Channels 0 & 1 onlyShows the VRS mode input characteristics Programming With Scpi CommandsSetting the Input Threshold Level Configuring I/O DirectionInppol Norm Determining the Input Threshold LevelTo set channels 40 through 43 to input digital states Reading Static Digital StateInit SENSDATACVT? @44 Totalize Positive or Negative Edge State ChangesAbout Period Frequency Measurements SENSDATACVT? @45 SENSDATACVT? @45 Agilent E1538A Enhanced Frequency/Totalize/PWM SCP Agilent E1538A Enhanced Frequency/Totalize/PWM SCP Sensfuncquad 0,@148,149 Sense Quadrature PositionRPS Sense Rotational Velocity Example of Rotational Velocity SenseOutput Static Digital State Controlling Output PolarityVariable Width Pulse Per Trigger Variable Width Pulse Train PWM Variable Frequency Fixed Width Pulse Train FM Variable Frequency Square-Wave Pulse Train Rotationally Positioned Pulse Output Rotational Pulse Command Usage Algupdate Init RST Sensfuncrvel 12,MISS,@140 Example of variable position, preset widthVariable Position, Width Preset by Time Example of variable width by angle, preset position Fixed Position, Variable Width by Angle Example of variable width by time, preset positionALGSCALAR’ALG1’,’Width2’,.010 Stepping mode values Stepper Motor Control Use the commandSensfuncvolt @100 Full Step Mode, Full and Half Speed, 4-Channel Page RST and *TST important Command Syntax For newer Units only Scpi Command ReferenceCommand Syntax For newer Units only Discussed Comments INPutPOLarityINPutPOLarity? ParametersLevel can be set to a resolution INPutTHResholdLEVelINPutTHResholdLEVel? OUTPutPOLarity OUTPutPOLarity?Send with VXIplug&play Function hpe14XXcmdReal64Q SENSeFREQuencyAPERture Related Commands Sensfreqaper SENSeFREQuencyAPERture?SENSeFREQuencyLIMitLOWer Init Related Commands INPutPOLarity SENSeFREQuencyLIMitLOWer?SENSeFUNCtionCONDition SENSeFUNCtionPERiod SENSeFUNCtionFREQuencySENSeFUNCtionQUADrature SENSeFUNCtionPWIDthSENSeFUNCtionRVELocity RPS SENSeFUNCtionTOTalize SENSePERiodAPERture SENSePERiodLIMitUPPer SENSePERiodAPERture?Init SENSePERiodMODE SENSePERiodLIMitUPPer?Related Commands SENSePERiodMODE SENSePERiodMODE?SENSePERiodNPERiods SENSePERiodNPERiods? SENSePERiodRANGeUPPerSend with VXIplug&play Function hpe14XXcmdInt32Q SENSeTOTalizeRESetMODE SENSePERiodRANGeUPPer?RST Condition is Send with VXIplug&play Function hpe14XXcmd SOURceFMSTATe SENSeTOTalizeRESetMODE?Send with VXIplug&play Function hpe14XXcmdInt16Q SOURceFMSTATe?SOURceFUNCtionRPULse SOURceFUNCtionSHAPePULSe SOURceFUNCtionSHAPeCONDitionSOURceFUNCtionSHAPeSQUare SOURceFUNCtionSTEPperComments Send with VXIplug&play Function hpe14XXcmd Relationship of minvel, and maxvel Usage See Stepper Motor Control on SOURcePULMSTATeSOURcePULSePERiod SOURcePULMSTATe?SOURcePULSeWIDTh SOURcePULSePERiod?SOURcePULSeWIDTh? SOURceRPULsePOSitionANGLe33,554,430 to 33,554,430 SOURceRPULsePOSitionANGLe? SOURRPULseVARTypeUsage SOURceRPULseWIDThANGLe SOURRPULseVARType?SOURceRPULseWIDThANGLe? SOURceRPULseWIDThTIME00000787 to SOURceRPULseWIDThTIME? General Specifications SpecificationsFrequency Measurement Pulse Width Measure Rotational Pulse Source