Seite 11 von, Extension box | Compex Systems SONOSAX SX-S, SX-V

SONOSAX SX/S USER MANUAL

Seite 11 von 22

6.1The Extension module includes:

{Communication with Boom operator over a "private line" with sidetone

{Mono feed with the ability to talk to the agency folk

{Special feed for video assist

{Additional line output for a back up recorder

{Subaudable tone on slate

{Internal or external slate mic

{MS decoding for the mixer's and boom operator's monitor

{Remote roll for Stelladat and Nagra

{Switchable VU or PPM for both channels

{Phase correlation meter

{Nagra 4.2. and IV-S audio in and out connectors

{The extension module connects via a cable to the extension box that carries a wide variety of input and output connectors.

6.2Extension box

The extension box carries the following inputs and outputs:

{1 Left & 1 Right balanced output on standard XLR

{1 Left & 1 Right balanced input on standard XLR

{Mono balanced output on standard XLR

{Guest Line balanced output (mono-mix including talk - to guestline feature) on standard XLR

{Left and Right Video assist output on unbalanced RCA/Cinch connectors

{1 - 7-pin Tuchel connector to interface directly to the NAGRA IV-S Stereo inputs

{1 - 7-pin Tuchel connector to interface directly to the NAGRA IV-S Stereo outputs as well as Stop/Roll functions

{1 - 7-pin Tuchel connector to interface directly to the NAGRA 4.2. Mono inputs and outputs as well as Stop/Roll functions

{1 - 9 pin sub-d connector to interface directly to the Stelladat's inputs and outputs as well as Roll/Stop functions (Stelladat must be set for single button record)

A Selector switch on the Extension box lets you choose which recorder you are going to work with. Of course, you can always back up your work on a second recorder.

A mini-switch lets you choose between Stop and Pause operation of the Stelladat.

file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html

26.08.2004