Compex Systems SONOSAX SX-S user manual Seite 21 von, Sonosax SX-V

SONOSAX SX/S USER MANUAL Seite 21 von 22

A switch will select between the right Output or the AUX Bus.

11.3 Limiter

A switch will select normal operation or a limiter which limits the level to the nominal operating level (1,55 or 4,4 Volts depending on the output level selected).

11.4 Left and Aux / right LEDs

These LEDs illuminate to indicate limiter activity.

RETURN TO TABLE OF CONTENTS

12. SONOSAX SX-V

The SX-V series is derived from the SX-S. The technology and the modules are similar.

The following are all the modifications concerning the SX-V.

12.1 Power supply

The SX-V cannot accept batteries or accumulators inside. However, it can be powered with either 12V DC or through the mains outlet. The AC voltage range varies from 100 to 260V AC, 40Hz to 60Hz without any modification, which allows use of the console worldwide.

12.2 Frame

There is only one frame size for the SX-V, that is 10 input modules. Needless to say that you can purchase a console with less modules, or even replace one of them with a transformer output module.

The handle, the cover and the battery pack have been removed. Two optional brackets allow for an SX-V 19" rackmount to be fitted.

12.3 Circuit

The INSERT IN, INSERT OUT & LINE OUT connectors have been removed.

The XLR AUX output is connected in parallel with a 1/4" jack.

file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html 26.08.2004