Seite 15 von, Equipment | Compex Systems SONOSAX SX-S, SX-V manual

SONOSAX SX/S USER MANUAL

Seite 15 von 22

installation in an existing SX-S mixer.

6.17 SX022251 SX-S Extension box

The Extension Box is a signal distribution box (300mm x 56mm x 40mm) shipped with 1,5m of cable with the necessary connectors. Various connectors are installed in the distribution box to interface the SX-S mixer with the Extension Module directly with the Stelladat, Nagra 4.2, and Nagra IVS, or other equipment.

6.18 SX022260 SX-S Boom box

This small box connects to the SX-S Extension Module with an optional cable (SX922120). The box incorporates a 1/4" headphone socket, a 3 pin XLR socket for a talkback microphone and a switch to call the mixer's operator with a "Roll" indicator.

6.19 SX922120 SX-S Boom box cable

2-pair shielded cable 10 meters in length (longer on request) with 6 pin XLR connectors on each end to connect the Boom Box with the SX-S Extension Module.

RETURN TO TABLE OF CONTENTS

7.INSTALLATION INSTRUCTIONS for SX022270 SX-S Extension Module

7.1Equipment:

{022270 SX-S Extension Module

{SX922130 Internal cable extension module - Extension Box

{SX922140 Internal cable extension module - Boom Box

{SX860141 Socket 1/4'' with 150mm shielded cable and Dubox case

{SX8600342 6 Pin socket connector

{SX860500 6 Pin socket connector with 300mm flat cable

{SX942291 Blank Panel Jack 4.4 (2x)

{SX980124 Allen head screw M2,5x8 (4x)

{SX980123 Allen head screw M2,5x6 (4x)

{SX986420 Washer ribbed M2,5 (8x)

file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html

26.08.2004