Seite 2 von, Preparation, Closing the cover

SONOSAX SX/S USER MANUAL

Seite 2 von 22

INSTALLATION INSTRUCTIONS

for SX022270 SX-S Extension Module

FOUR CHANNEL MATRIX MODULE

ADDITIONAL AUX MODULE

INPUT MONITORING MODULE(SX-V only)

BALANCED TRANSFORMER OUTPUT MODULE

SONOSAX SX-V

TIPS ON USING YOUR MIXER

1. PREPARATION

1.1Opening the cover

Release the 2 slide-locks and simultaneously slide out the cover.

1.2 Closing the cover

Replace the cover and slide all the way in until the locks catch.

1.3 Removing the battery compartment

Make sure that the handle is in rest position. Remove the battery pack by releasing the 2 slide-locks, tilting the compartment diagonally towards you and lifting it out over the handle.

IMPORTANT: Keep the slide-locks pressed towards the center untill the battery compartment is completely lifted out of the mixer.

1.4Opening the battery compartment

The battery compartment may now be opened by loosening the screw on the left. Remove the plastic side cover. Insert:

{8 alkaline D-cells or 8 rechargeable nickel-cadmium batteries for the SX-S6

{10 alkaline D-cells or 10 rechargeable nickel-cadmium batteries for the SX-8 or SX-S10.

NOTE:On the left of the battery compartment, you will find the hex wrench (2mm) which will enable you to completely disassemble the SX-S without using any other tool.

WARNING :Never leave discharged batteries in your SX-S. Make sure before charging that your SX-S only contains rechargeable NiCd batteries. To ensure optimal autonomy, use only professional alkaline D-cells. Also check the manufacture date of D-cells.

file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html

26.08.2004