Compex Systems SX-V user manual Seite 14 von, 15 SX022241 SX-S Stereo analog level & Phase meter

SONOSAX SX/S USER MANUAL Seite 14 von 22

The Tape / direct switch selects between monitoring the Audio signal before the tape or after the tape (off-tape- monitoring). This allows you to immediately check the recorded program material, provided your recorder has the tape monitoring feature. A Dip switch provides you with the choice of a manual or an automatic Tape/direct function. In manual mode you use the tape direct switch to listen either before or after the tape. In automatic mode as soon as you press the roll button you monitor the signal from tape and as you press stop the direct signal. (DIP mini-switch 1 off auto/ on manual).

The Tape return rotary switch on the extension box selects the tape return source.

Configurations:
DIP Switch S-1
Position	Function	Factory Setting	Switch
1	Manual / Tape direct	Automatic	Off
2	Boom active	Switched	Off
3	Call LED momentary	Lamp on	Off
4	27 Hz Slate tone	Off	Off

Wiring of the 6 Neutrik connector (Boom Box connection)

Pin nb	Cable nb	Cable	Function
6	2	Cable call (GND)	CALL
5	2	Brown	Hi Mic Boom
4	2	White	Low Mic Boom
3	1	GND	GND
2	1	Red	Right channel H.phones
1	1	White	Left Channel H.phones

Jumper positions:

{JP-1 48 Volts ON-OFF (Factory setting off)

{JP-4 Pre or post mic level Sidetone pos. 1-2=pre / pos. 2-3 post (Factory setting post)

{JP-9 Slate to AUX bus (Factory setting on)

The SX-S Extension Module is available in various configurations. It will occupy two spaces in the mixer.

6.15 SX022241 SX-S Stereo analog level & Phase meter

This module consists of two very high quality meter movements for the Left and Right channels. The meter scales can be illuminated with two intensities. The meters can be switched to indicate as VU meters or as peak-meters. They can also be switched between mono and stereo. In mono mode the left meter functions as a phase correlation meter while the right channel meter always indicates the greater of the two signals. LEDs indicate which channel is the greater.

6.16 SX022270 SX-S Extension module

This module contains the SX022241 Stereo Analog Level & Phase Meter, plus the monitoring and communication functions, (including MS decoding). It is shipped with the necessary Neutrik 6-pin chassis connector (SX860180) for connection to the SX-S Boom Box (SX022260) and the 12-pin chassis connector (SX860208) for connection to the SX-S Extension Box. (SX022251). It also includes the necessary mounting hardware and connectors for

file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html 26.08.2004