Compex Systems AP4530 manual Template for Allen & Heath iDR-8 Front Panel Key Label

Page 47

Template for Allen & Heath iDR-8 Front Panel Key Label

File: iDR-8_label.dot for MicrosoftWord

Each label section is a table. You can format it in the usual way.

Edit the text to identify the key and LED functions.

Overall size of each label is 144 x 10 mm.

Remove the iDR-8 front face plate (4x 2mm hex screws).

Adhere the labels to the white label strips.

Refit the iDR-8 face plate.

Once fitted the labels are protected by the face plate plastic windows.

1

9

2

10

3

11

4

12

5

13

6

14

7

15

8

16

iDR-8User Guide

47

Image 47
Contents IDR-8 Conditions Of Warranty Limited One Year WarrantyIDR-8User Guide Important Safety Instructions Read FirstImportant Mains Plug Wiring Instructions This appliance must be earthedIntroduction Contents DR-8 Welcome to the iDR-8Stereo audio monitor with front panel Main FeaturesIDR-8 main processing unit 2U, 8 mic/line Daisy chain iDR-8 units Any number may beExpander status LEDs These display Front Panel OverviewFront panel RS232 port This is used for Monitor in L Monitor OUT L Rear Panel OverviewSystem Processing Overview IDR-8User Guide Page IDR System Manager Software Bundle Getting Started Check the ContentsIDR-8 Main Unit Installing the iDR-8Earthing Turning the iDR-8 On and Off Parameters restored on power-up The iDR-8Starting Offline with iDR System Manager Software Updating the iDR-8 Operating Code Checking the iDR-8 Operating Code VersionPPP Setup IDR-8 Setup MenusChanging the Unit Name Accessing the iDR-8 Setup MenusChecking the Current Settings and Status Rebooting the iDR-8DR-8 Getting Started Checking the HardwareRS232 COM Port Communicating with the iDR-8Network Port Communicating Using a TCP/IP Connection Connect the PC to the iDR-8 Plug the PC Ethernet port Connecting the iDR-8 Direct to the PCConnecting the iDR-8 to a Network How to get the MAC addressSetting up the PC dial-up connection You need Communicating Using a Dial Up ConnectionSetting up a Dial-up Connection Changing the iDR-8 PPP settings Go to menu *6 PPPConnect the iDR-8 to the modem Connecting the iDR-8 to a ModemDial up the iDR-8 using the remote PC Open up Starting the iDR System ManagerStart the iDR System Manager from the Start / Programs Setting the Time and Day ClockArchiving and Loading Configurations Working with the iDR System ManagerInput Source window From within the Input XLR Analogue Inputs and OutputsMonitor TRS Input and Output The monitor is Monitor Headphones Output This followsMonitor Inputs and Outputs Daisy chaining iDR-8 monitors The active Using the Monitor as Additional ChannelsChecking for expanders You can use the front Adding the iDR-in and iDR-out Audio ExpandersCheck the connections The iDR-inAUDIO OUT Turning the expander on or off Turn the unit onExpanded multiple iDR-8 system This diagram Slave Linking iDR-8 UnitsUnit a Connecting to the iDR-8 The iDR-8communicates Adding the iDR-switch ExpanderChecking for iDR-switch expanders You can Using the switch closure inputs The input is Connectors and grounding Pluggable PhoenixUsing the logic outputs Each output is opto Selecting the Communications Options Click on MIDI, SysNet and PL-Anet PortsSysNet IDR-8 Memory System IDR-8 unit settings These areConfiguration file settings These are Only store the parameters you need For your Starting with the PatchesDecide your system starting point Assign DR-8 Technical SpecificationDR-8 ApplicationDescription IDR-8 Installer Front PanelIDR-switch Front Panel HeadphonesNetwork Port IDR-switch InputsIDR-switch Logic Outputs Power SupplyNaming Soft SwitchesSoftware ClockFader Groups DelaySignal Generator Level ControlFactory default patch parameters Factory default unit settingsFactory default configuration settings Template for Allen & Heath iDR-8 Front Panel Key Label