professional control surface
Chapter 5: EuControl
EuControl is launched automatically upon starting your Mac and runs in the background. EuControl is responsible for finding, linking, and communicating with all MC Mixes and MC Controls on the network. EuControl’s configuration tasks are accessed by clicking the green icon 
on the Mac taskbar and selecting EuControl Settings.
Only one instance of EuControl can run on a workstation. However, multiple work- stations on a single network can each run EuControl. Each instance of EuControl can connect up to four MC Mixes on the network. These multiple MC Mixes act together as a single control surface. Once connected, these MC Mixes are not available to other instances of EuControl until relinquished.
Figure 5-1 Selecting EuControl Settings from the taskbar
The tabs are discussed in the order (left to right) they appear at the top of the EuControl Settings dialog.
5.1Surfaces
The Surfaces tab shows all MC Mixes on your network and the MC Mixes connect- ed to your instance of EuControl.
USER GUIDE
41
EuControl
Artist Series