Fostex VR800 owner manual Auto Punch In/Out Take, Undo/Redo Auto Punch In/Out recording

Page 39

VR800 Owner’s Manual (Punch In/Out Recording)

Auto Punch In/Out Take

After you are satisfied with your rehearsal, you can proceed to an actual take of Auto Punch In/Out.

You can undo or redo Auto Punch In/Out recording if you change your mind. The control panel settings are the same as those for rehearsal.

1.Press the RECORD TRACK select key [3] to set track 3 to READY.

2.Locate a point slightly before the Auto Punch In point.

3.Confirm that Auto Punch mode is turned on.

Press the RECORD button while holding down the SHIFT key to turn on the function, if it is not already on.

4. Press the RECORD button while holding down the PLAY button.

The flashing [RHSL] on the display changes to an illuminated [TAKE], and recording starts.

A.PUNCH

 

TAKE

Lights up

The VR800 operates as follows.

•The lamp of RECORD TRACK select key will only light up between the AUTO PUNCH IN/OUT point, and will flash in any other case.

•When the Auto Punch Out point is passed, the VR800 cancels Auto Punch mode automatically, and nothing appears in the A. PUNCH display area.

<Caution after Punch Out>

At “Take” of punch out, the punch-in recording track will not

immediately enter the repro monitor mode from the input

monitor mode enter the repro monitor mode about two

seconds after mute playback. This is a functional feature of

VR800 and not a malfunction.

5. When you finish recording, press the STOP button.

Playback

Auto Punch In point

Auto Punch Out point

Playback

start point

(Take In)

(Take Out)

end point

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track 8

 

 

 

 

 

 

 

 

 

 

Track 7

 

 

 

 

 

 

 

 

 

 

Track 6

 

 

 

 

 

 

 

 

 

 

Track 5

 

 

 

 

 

 

 

 

 

 

Track 4

 

 

 

 

 

 

 

 

 

 

Track 3

 

 

 

This part is changed.

 

 

 

 

Track 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track 1

 

 

 

 

 

 

 

 

 

 

All tracks are in playback

 

Only track 3 in input

All tracks are in playback

 

 

monitoring mode.

 

monitoring, and data will be

monitoring mode.

 

 

 

 

 

 

 

recorded.

 

 

 

 

 

 

 

 

The RECORD button lamp

 

 

 

 

 

 

 

 

lights up

in this area.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Play track 3 to check the result of the Auto Punch In/Out operation.

If you fail with AUTO PUNCH IN/OUT and are not satisfied, repeat the process by performing the AUTO PUNCH IN/ OUT undo operations described in the next section.

The VR800 punches in auto-

The VR800 punches out auto-

matically at the Auto Punch In

matically at theAuto Punch Out

point.

point.

 

Undo/Redo Auto Punch In/Out recording

You can undo or redo Auto Punch In/Out recording.

Press the UNDO/REDO key after recording is complete to restore the conditions that existed prior to the recording. Press the UNDO/REDO key again to restore the conditions that existed after the recording.

Follow the notes below:

Note-1: The Undo/Redo function is effective only when the VR800 is stopped.

Note-2: The Undo/Redo is not effective if you perform one of the following operations after you finish recording:

•When a new recording is made.

•While a new editing is executed (such as Copy & Paste, Move & Paste, or Erase).

•When in the AUTO PUNCH ON mode, when the AUTO PUNCH IN point is passed in the PLAY (or RECORD) mode.

•When the power is momentarily switched off.

•When the program is changed.

•When ejecting a removable SCSI disk that is the current drive.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Model Safety Instructions Table of Contents 106 Introduction Precautions Top panel Names and FunctionsRecord track select keys Record Track 1 Access LED AccessExecute/Yes key EXECUTE/YES Contrast adjustment knobSetup key Setup Clipboard In key Clipboard IN/ PreviewScrub key Scrub Auto Return/Auto Play mode on/off keyEdit key Edit JOG dial JOG/ ShuttleRewind button Rewind Vari Pitch key Vari PITCH/ P.EDITShift key Shift Fast forward button F FWDRecord button RECORD/ Auto Punch Store key StoreHold/ key Hold Auto Punch Out key Auto Return End key Auto RTN END/ PreviewAuto Return Start key Auto Punch In key Auto Punch IN/ PreviewScsi connector Scsi Connector D-SUB 25-pin Data output jack Data OUT Connector OpticalData input jack Data in Connector Optical Midi OUT jack Midi OUT Connector DIN 5-pinSide Panel Display Section Digital Time base is ABSTime base is MTC Time base is BAR/BEAT/CLKAction to take Acc Error messageLoad Err message Unformat ! messageTime Base Before StartingRecording method and Remain indicator Remain indicatorRecording method You can name a program Managing songs by Program Change functionReal tracks and Additional tracks You can swap data between twenty-four mono tracksAdditional tracks in units of eight tracks Input monitoring When you set a track to recording modeWhen you set a track to recording stand-by mode Input monitoring and playback monitoringAbout an audio file Audio file and eventHints Formatting a Disk Recording modeFormatting a new disk Formatting a current drive disk Scsi diskPress the EXECUTE/YES key again Re-formatting a formatted diskInsert a formatted disk into the Scsi drive Press the EXECUTE/YES keyFormatting a current drive disk 3.5-inch E-IDE hard disk Formatting a backup disk Scsi diskFormatting an unformatted disk for backup Insert a new disk into the backup driveFormatting a backup disk fixed disk Re-formatting a formatted disk for backupInsert a formatted disk into the backup drive While holding down the HOLD/ key, press the Store key Turn on the power to the VR800 and a connected Scsi driveHandling Programs Creating a new ProgramTo enter a title Using a Program Change functionDeleting a Program Press the Setup key while the VR800 is stoppedEditing a Program title JOG dial to enter characters or numbersAfter you enter the title, press the EXECUTE/YES key Storing the edit points What is Punch In/Out recording?Punch In/Out Recording Auto Punch In/OutMusic instrument Guitar Recording level Rehearsing Auto Punch In/Out recordingPress the Record button while holding down the Shift key Set the track for Auto Punch In/Out to ReadyPress the Record button while holding down the Play button When you finish recording, press the Stop buttonAuto Punch In/Out Take Undo/Redo Auto Punch In/Out recordingPlay the guitar accompanying the playback of tracks Press the foot switch while holding down the Stop buttonManual Punch In/Out Rehearsing Manual Punch In/Out recordingManual Punch In/Out take Cancelling Rehearsal modeUndo/Redo Manual Punch In/Out recording Music Instrument Recording to a Metronome SoundCreating a Tempo Map Turning the Metronome function onQuitting recording Adjusting monitor/record level of the musical instrumentChecking the metronome sound Starting recordingDigital recording from an external digital device Connecting an external digital deviceAssigning tracks and setting the digital-in clock Digital RecordingDigital recording to an external device Selecting a recording trackStarting and quitting recording Selecting a playback program Setting a digital output trackMemory key Storing a Locate Point Edit PointPress the desired memory key Storing and editing the locate points to the memory keysStoring in real-time Press the Store keyPress the memory key that you pressed in again Editing and storing locate dataEditing and storing data Press the HOLD/ key while the VR800 is stoppedStoring and editing Locate key Select the Locate number desired using the JOG dial Next press the Locate keyPress the Store key. the Store key lamp lights up Edit and re-store data that is already stored Direct Locate Locate FunctionAuto Return Auto PlayStart playback a little before the Auto RTN Start point Auto RepeatCue & Review function using the Rewind and F FWD buttons Cue & Review function using the Shuttle featureCue & Review Function Press the Stop button to stop the digital scrubbing Digital scrubbing using the Scrub functionPress the Scrub key while the VR800 is stopped Turn the JOG dial to perform digital scrubbingPreviewing the fall of the sound fade out Preview FunctionExecuting the Preview function Previewing the rise of the sound fadePress the Stop button or the EXIT/NO key Trimming the sound while previewingMove & Paste Editing TracksCopy & Paste and Move & Paste Copy & PasteKey for which you wish to check the edit point Executing Copy or MoveChecking the clipboard data Paste start pointTurn the JOG dial to enter the number of repeats Repeat= Executing PasteUndo/Redo Paste Select a destination track to paste dataErase Erasing a specified part of the data between ABS 0Erasing data from a specified point to REC END Executing Erase Undo/Redo EraseStoring the erase start and end points Swapping mono track data between Real tracks, Addi Track ExchangeExecuting Track Exchange Connecting external equipment Refer to connecting schematic Midi sync functionConnect the VR800 Midi OUT to Midi in of the Midi sequencer Confirming the Midi clock sync Setup of VR800Execution of recording MTC sync/MIDI machine control systemSetup of external equipment Connecting to external equipmentConfirming MTC sync/MMC Offset mode For ABSConnection to external equipment External Midi equipment sync system by the slave modeConfirming chase lock Precautions at MTC related setupsUsing a Scsi drive as the current drive Saving and Loading Song DataOutline of the save/load operation Fostex D-5, Pioneer D-05 Save DAT or adat Title of data to be saved to a backup Scsi disk Saving/loading data using another Scsi driveInsert an unformatted disk into the backup drive Press the EXIT/NO key to exit Setup modeSave PGM ? menu Load PGM ? menu Select a flashing SCSi id-6 and press EXECUTE/YES keySaving/loading via a DAT or adat DAT or adat connection and preparation Saving song data via a DAT or adatUse the JOG dial to select a Program to save Use the JOG dial to select the desired tracksStart recording on the DAT or adat Progresses Loading song data via a DAT or adatUse the JOG dial to select a Program into which to load data Start playing the DAT or adatSaving and loading song data via a Scsi drive If you do not wish to delete the existing data If you wish to delete the existing dataChanging the Initial Settings Setup Mode Following diagram shows the position of each menu Selecting Setup modeSetting a time signature Sign. Set ? menu Storing a time signatureSelect a Program for which to set a time signature Clearing all time signature and tempo settings Modifying or deleting stored time signaturesChanging the BAR at ABS 0 of the time base Storing a tempo value Setting a tempo Tempo Set ? menuChecking the stored tempo setting Select a Program to check the tempo setting forSetting the Metronome function Click ? menu Setting the Metronome functionRepeat steps 3-5 to store necessary tempo data Turn the JOG dial to enter a desired preroll time value Setting a preroll value Preroll ? menuSetting a preroll time Turn the JOG dial to select on or oFFSetting Midi sync output signal Sync Out ? menu Setting Midi sync signalTurn the JOG dial to select the desired Midi sync signal Turn the JOG dial to enter the desired frame rate Setting an MTC frame rate Frame Rate ? menuSetting an MTC offset value Mtc Offset ? menu Setting an MTC frame rateSetting an MTC offset Setting Offset mode Ofset Mode ? menuUse the JOG dial to select the desired Offset mode Setting the Slave mode Slave Mode ? menuSetting MTC Offset mode Turning Slave mode on and offUse the JOG dial to select the desired Slave type Setting the Slave type Slave Type ? menuSetting the Slave type Use the JOG dial to turn Slave mode on and off100 Setting the Record Protect function Rec Protect ? menuRecording enabled/disabled Use the JOG dial to enable or disable recordingSetting digital input tracks Digi. In ? menu Setting digital input tracks101 102 Setting digital output tracks Digi. Out ? menuSetting a clock of digital Setting digital output tracksSetting BAR/BEAT resolution mode Resolu ? menu Setting BAR/BEAT resolution mode103 104 Setting the Midi device number Device ID ? menuSetting the Midi device ID Use the JOG dial to turn the mode on or offChecking the number of track events NOs Event ? menu Checking the number of track events105 Midi Implementation Chart 106Transmitted Recognized Remarks Command List Movement Recorder MMC Response/Information Field List Command107 108 Fostex Midi System Exclusive Message Format for VR800109 Status Request110 Example 2 Locate memory is recalled using the read commandData Type 111Signature map 112113 114 115 Status Request Command116 117 118 Maintenance119 Declaration of EC DirectiveIndex Remain Fostex Corporation
Related manuals
Manual 24 pages 22.9 Kb
Top Page Image Contents