Aviom MH10m, MH10f manual Ventilation, Cleaning

Page 16

Ventilation

Always allow adequate ventilation for devices mounted in equipment racks. Avoid placing your Pro64 product directly above or below other rack-mounted devices that produce high levels of heat, such as power amplifiers.

Cleaning

Before cleaning a Pro64 product, turn off the power switch and unplug the unit from the AC power source.

To clean the surface of the Pro64 product use a clean, soft lint-free cloth that has been slightly moistened with water only. For tougher dirt, use a cloth slightly dampened with water or with a mild detergent. Always be sure to dry the surface of the unit before proceeding with use.

When cleaning your Aviom products, never spray cleaners directly onto the product surfaces. Instead, spray a small amount of the cleaning solution onto a clean cloth first. Then use the dampened cloth to clean the product.

Never use solvents or abrasive cleaners on the finished surfaces of your Aviom products.

Maintaining Your Pro64 Product

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User Guide Certifications Iii Important Safety Instructions Warranty Information Aviom, Inc. Limited Warranty Table of Contents Viii EtherCon Connector FeaturesWelcome LC Connector SFP ModuleFirmware Update Cat-5eAbout A-Net Sample Rate Minimum MaximumControl Data ClockingNet Ports Support For Pro16 Series Products AC Line Conditioning AC PowerRack Mounting Cleaning VentilationFront Panel Components  MH10 Rear Panel MH10f Rear Panel  Front Panel Features Network Mode IndicatorNet Port LEDs Net LEDManaged Mode LED AC Power Rear Panel FeaturesBackup DC Power MH10f Net Ports Manual Mode Configuration Button MH10 Configurations Auto ModeR G E Manual Mode Configuration a Merge AllStage TAG E Configuration C Merge Configuration C Example Monitor Console MH10 Configuration Errors Data LoopsSpecifications Fiber Optic ModesDimensions Index SFP Port A, B. See A-Net Port See A-Net Ports
Top Page Image Contents