Aviom MH10f, MH10m manual Welcome, Features, EtherCon Connector

Page 9

Welcome

This User Guide is designed to familiarize you with the features and functions of your new Pro64™ product. In developing the Aviom Pro64 Series product line, we have made every effort to make the user interface as easy to use and understand as possible. We encourage you to read the manual completely, as some of the powerful features of your new product may not be immediately apparent.

This document is a combined User Guide for the MH10 and MH10f Merger Hubs, which have many features in common. Differences in functionality will be called out as needed.

Features

The MH10 and MH10f Merger Hubs are designed to merge and distribute A-Net® data streams and provide a host of professional features designed to make audio networking with Pro64 Series products easy to set up and configure in a variety of professional audio situations.

MH10 Merger Hub features:

Ten bidirectional A-Net ports

Ten EtherCon® RJ45 network connectors

Three Manual Mode configurations

MH10f Merger Hub features:

Ten bidirectional A-Net ports

Eight EtherCon® RJ45 network connectors

Two SFP fiber optic ports

Three Manual Mode configurations

Multiple MH10 and/or MH10f Merger Hubs can be used when creating a Pro64 audio network.

The EtherCon Connector

Pro64 Series products feature locking connectors for all network I/O. The Neutrik® EtherCon connector is a dual RJ45-type connector that can receive a standard Category 5e cable or a cable fitted with the special locking EtherCon connector.

When using a standard Cat-5e cable, plug the cable into the center of the EtherCon jack; release the cable by pressing on the small plastic tab built into the cable connector.

About Your Pro64 Product



Image 9
Contents User Guide Certifications Iii Important Safety Instructions Warranty Information Aviom, Inc. Limited Warranty Table of Contents Viii Features EtherCon ConnectorWelcome SFP Module LC ConnectorCat-5e Firmware UpdateSample Rate Minimum Maximum About A-NetClocking Control DataNet Ports Support For Pro16 Series Products AC Power AC Line ConditioningRack Mounting Ventilation Cleaning  Front Panel ComponentsMH10 Rear Panel   MH10f Rear PanelNetwork Mode Indicator Front Panel FeaturesNet LED Net Port LEDsManaged Mode LED Rear Panel Features AC PowerBackup DC Power MH10f Net Ports Manual Mode Configuration Button Auto Mode MH10 ConfigurationsR G E Configuration a Merge All Manual ModeStage TAG E Configuration C Merge Configuration C Example Monitor Console Data Loops MH10 Configuration ErrorsFiber Optic Modes SpecificationsDimensions Index SFP Port A, B. See A-Net Port See A-Net Ports