Aviom MH10f, MH10m manual Stage

mixer. Port 10 is connected to a group of four output modules or Pro64 console interface cards (such as the 6416Y2 card for Yamaha® digital products) at FOH which are connected to the mixing console (marked as “Stage Outputs”).

The engineer creates mixed audio for the speakers, amps, and processing devices and connects this audio to the input module marked “FOH Returns 1-16 In.” These channels appear at outputs 1-9 of the MH10.

One output module is shown (“FOH Returns 1-16 Out”), but by adding more output modules, digital splits are easy to create.

STAGE

Stage Inputs 1-16	1
	2
Stage Inputs 17-32
	3
Stage Inputs 33-48
	4
Stage Inputs 49-64		MH
	5
	6
		10
	7
FOH Returns 1-16 Out
	8
	9
	10

FOH

FOH Returns 1-16 In

Stage Outputs 1-16

Stage Outputs 17-32

Stage Outputs 33-48

Stage Outputs 49-64

    A 64x16 digital snake using only one MH10 Merger Hub

Configuration B Example 2

Adding more input modules at the FOH position allows the engineer to create content for monitoring, recording, broadcast, etc.

In this example, inputs from the stage and their associated outputs at the front-of-house position are unchanged, as are the returns from FOH to the processors and amps from the previous example.

Two additional input modules at front-of-house are used to send two streams of monitor content to the stage area for performers. Here an ASI A-Net Systems Interface is used to create two streams of Pro16 data for use with A-16II and A-16R Personal Mixers. The digital snake is now configured as 64x48.

MH10 Configurations 21