Aviom MH10f, MH10m manual AC Power, AC Line Conditioning, Rack Mounting

Page 15

AC Power

Always plug the unit into a properly grounded (earthed) outlet. Always use the AC line cord that was shipped with the unit. Grasp the power cable by the connector and never by the cord itself when connecting and disconnecting it from the power source.

Do not expose the Pro64 device to moisture, rain, or excessively damp environments.

AC Line Conditioning

Aviom products are digital devices and as such are sensitive to sudden spikes and drops in the AC line voltage. Changes in the line voltage from lightning, power outages, etc. can sometimes damage electronic equipment.

To minimize the chance of damage to your equipment from sudden changes in the AC line voltage, you may want to plug your equipment into a power source that has surge and spike protection. Power outlet strips are available with built-in surge protection circuits that may help protect your equipment.

Other options for protection of your equipment include the use of an AC line conditioner or a battery backup system (sometimes referred to as an uninterruptible power supply, or UPS).

Rack Mounting

Pro64 products are designed to be mounted in a 19-inch equipment rack. The rack ears on each side of the device are designed to support the weight of the product without additional hardware. Each rack ear contains holes for two screws per side. Always support the unit with all four screws to avoid damage to the unit.

To rack mount the Pro64 product, position it in the equipment rack at the desired location. Use standard rack-mounting screws (10-32 size) to attach the unit to your rack hardware. Tighten all four screws firmly, but avoid overtightening.

Aviom suggests the use of non-metallic washers between the rack- mounting screws and the device’s finished surface to avoid marring the finish on your Aviom products.

Maintaining Your Pro64 Product



Image 15
Contents User Guide Certifications Iii Important Safety Instructions Warranty Information Aviom, Inc. Limited Warranty Table of Contents Viii Features EtherCon ConnectorWelcome SFP Module LC ConnectorCat-5e Firmware UpdateSample Rate Minimum Maximum About A-NetClocking Control DataNet Ports Support For Pro16 Series Products AC Power AC Line ConditioningRack Mounting Ventilation Cleaning  Front Panel ComponentsMH10 Rear Panel   MH10f Rear PanelNetwork Mode Indicator Front Panel FeaturesNet LED Net Port LEDsManaged Mode LED Rear Panel Features AC PowerBackup DC Power MH10f Net Ports Manual Mode Configuration Button Auto Mode MH10 ConfigurationsR G E Configuration a Merge All Manual ModeStage TAG E Configuration C Merge Configuration C Example Monitor Console Data Loops MH10 Configuration ErrorsFiber Optic Modes SpecificationsDimensions Index SFP Port A, B. See A-Net Port See A-Net Ports