Alesis quick start Param Direct-Control Parameter for FX3

FX3 – Continued

Plate Reverb

Recreates the classic “plate reverb” sound achieved by using a metal plate. Higher values indicate a wetter mix.

Pedal Plate Reverb

A Plate Reverb effect with its wet/dry mix controlled by the expression pedal.

Chorus – same as in FX1.

Pedal Chorus – same as in FX1.

Flanger – same as in FX1.

Pedal-Controlled Flanger – same as in FX1.

Rotary Speaker – same as in FX1.

Pedal-Controlled Rotary Speaker – same as in FX1.

Pitch Transpose – same as in FX1.

Variable Pitch Transpose Up – same as in FX1.

Variable Pitch Transpose Down – same as in FX1.

Off

Indicates FX3 is off.

PARAM (Direct-Control Parameter for FX3)

This direct-control parameter works in a similar fashion as the one for FX1.

For Doubling, Ping Pong, Tape Delay and Stereo Delay, indicates the length of the delay, up to one second for Tape Delay and up to half a second for the others.

For Chorus, indicates the rate of the chorus.

For Flanger, indicates the rate of the flanger.

For Rotary Speaker, indicates the rate of the speaker rotation.

For Pedal Pitch Transpose Up and Down, indicates the amount of pitch change in 1/4 semitones (from 1/4 semitone to more than 2 octaves). Wet/dry mix is fixed at 100% wet.

For all reverbs, higher values indicate a longer decay.

For fixed-interval Pitch Transpose, indicates the wet/dry mix from 0 (100% dry) to 10 (50% dry, 50% wet) to 20 (100% wet).

Indicates that the expression pedal controls the parameter.

Indicates FX3 is off.

12