Overview: Chapter 4
DRUM SET
Press [DRUM SET], and the display shows the selected Drum Set number on the left side and the Drum Set’s name on the top line.
To select a particular Drum Set, turn the [VALUE] knob. The range is from 00 to 20.
Drum Set selection and management is covered in more detail in Chapter 2.
EXT TRIG
Press [EXT TRIG], and the display shows the Trigger input at the bottom and Trigger Characteristics on the top line, and the note associated with the Trigger in the middle.
External triggering is a complex topic and is described in detail in Chapter 6.
GROUP
Press [GROUP], and the display shows the selected MIDI note number in the middle and the assigned Drum’s mode on the top line.
Group: Multi
To change the mode, turn the [VALUE] knob. There are four options:
Multi: When triggering a note repeatedly, each trigger will cause the sound to go through its entire decay. This is useful with cymbals, since early strikes continue to decay as you play later strikes.
Single: When triggering a note repeatedly, a new hit will automatically terminate any sound that is still decaying. This is useful with many percussion sounds (such as tambourine, agogo, etc.).
Group 1 and 2: A
DM5 Reference Manual | 31 |