Chapter 1: Setting Up
EXTERNAL TRIGGERS HOOKUP
Plug all of the triggers you will be using into the rear panel jacks. Since the triggers are interactive, the DM5 needs to “see” all of the signals simultaneously. Therefore, you should make sure that all triggers are connected before you begin editing the External Trigger parameters.
Use the table below as a guide for connecting your trigger inputs. The trigger default note numbers correspond to these drum sounds. If you are using a
Trigger | Note | # | Sounds | Trigger | Note | # | Sound |
1 | Bb1 | 46 | 7 | Eb2 | 51 | Ride Cymbal | |
2 | C1 | 36 | Bass Drum | 8 | C#2 | 49 | Crash Cymbal 1 |
3 | D1 | 38 | Snare | 9 | A2 | 57 | Crash Cymbal 2 |
4 | C2 | 48 | Tom 1 | 10 | D3 | 62 | Conga |
5 | A1 | 45 | Tom 2 | 11 | F3 | 65 | Hi Timbale |
6 | F1 | 41 | Tom 3 | 12 | G3 | 67 | Hi Agogo |
Note: Drum Set 18 uses a different set of default note numbers. The trigger default note numbers for all pre set drum sets can be found in the DM5 Factory Drum Set Reference Chart.
For more information about setting up the External Trigger parameters in the DM5, see pages 18 through 22, and Chapter 6.
8 | DM5 Reference Manual |