American Audio Pro-Scratch 2 manual Scanning Fast Forward / Fast Reverse

BASIC OPERATIONS (CONT.)

8. SCANNING (FAST FORWARD / FAST REVERSE)

This function gives you a fast search through a disk or track. Turn the SEARCH WHEEL (5) in clockwise direction for fast forward or turn the wheel counterclockwise for fast reverse. You can scan in four different for- ward and four different reverse speeds depending on how much you rotate the wheel.

9. SETTING and STORING a CUE POINT:

	OFF
POWER	ON
1	2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO	KEY
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		CUE BPM
						BEAT SYNC.	LOCK
SINGLE
	LOOP						BPM
RELOOP		T	M	S	F		PITCH
PARAMETER RATIO
	SCRATCH	FILTER		HOLD		ECHO	TRANS
	SKID	PHASE				FLANGER	PAN

BOP

FX

MIX

ENTER

EJECT

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

Setting A Cue Point:

Figure 14

A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (17) is pressed. You may set your cue points anywhere on a disc or in a track. You may set up to four independent cue points per disk. Three cue points are stored in the FLASH BUTTONS 1-3 (8) and one is shared by the IN BUTTON (14), BOP BUTTON (30) and the CUE BUTTON (15). There are two (2) ways to set and create a CUE point as detailed in figures 15 and 16

		OFF
POWER		ON
1	2	3	4	5	6	7	8	9	0
PARAMETER TIME						CUE
SINGLE
	LOOP
RELOOP									T

PARAMETER RATIO

PROGRAM	NONSTOP	AUTO
		CUE BPM
ELAPSED	TOTAL REMAIN	BEAT SYNC.

M S F

KEY

LOCK

EJECT

BPM

PITCH

1)You may press the IN BUTTON (14) on the fly (while the disc is playing). This will set a CUE Point without music interruption. Pressing the CUE BUTTON

(15)will now return you to the same point that you pressed the IN BUTTON (14). You may now store this CUE Point in any of the FLASH BUTTONS 1-3 (8). Pressing the CUE BUTTON (15), BOP BUTTON (30) or the IN BUTTON (14) will now return you to this exact point.

	OFF
POWER	ON						Figure 15
1	2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		CUE BPM	KEY
						BEAT SYNC.	LOCK
SINGLE							EJECT
	LOOP						BPM
RELOOP		T	M	S	F		PITCH

PARAMETER RATIO

SCRATCH	FILTER	HOLD	ECHO	TRANS
SKID	PHASE		FLANGER	PAN

BOP

FX

MIX

ENTER

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

SCRATCH	FILTER	HOLD	ECHO	TRANS
SKID	PHASE		FLANGER	PAN

BOP

FX

MIX

ENTER

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

2)You may also use the JOG WHEEL (16) to set a cue point. While a disc is in PAUSE or CUE mode, use the JOG WHEEL (16) to scroll through a track to find your desired starting point. Once you have found your desired posi- tion press the PLAY BUTTON (17) to set your cue point. Pressing the CUE BUTTON (13) or the IN BUTTON (14) will now return you to this exact point.

Figure 16

©American Audio® - www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 16